mk1nova_rich
02-04-12, 12:53 PM
I fitted a bias pedal box to my rally Nova on Saturday. The brake lines were already in the shell when I bought it but the bolts to attach them to the master cylinders are missing.
Do I need to fit copper washers like on calipers? If so does the washer go between the bolt head and the banjo, or between the banjo and master cylinder?
Also when I screw in the fluid reservoirs do I need to use a copper washer or PTFE tape, or use nothing?
Do I need to fit copper washers like on calipers? If so does the washer go between the bolt head and the banjo, or between the banjo and master cylinder?
Also when I screw in the fluid reservoirs do I need to use a copper washer or PTFE tape, or use nothing?