View Full Version : what wire on xe conversion
novasrikev
31-03-12, 07:39 PM
i have an early xe loom so i have a big plug like gte/gsi
i have 4 wires to the green plug
brown with yellow trace
brown with white trace
brown with blue trace
then plain white
can any one help
Isn't the blue the temp gauge?
Thin blue and red trace is not needed.I didnt use it and mine was fine.
All your other stuff is correct as you typed.
novasrikev
31-03-12, 08:25 PM
thanks andy +rep fella
novasrikev
31-03-12, 08:27 PM
Isn't the blue the temp gauge?
its an early loom no temp wire on it
Thin red/blue = Something to do with speed sensor/ABS wire from a quick search on here.
The 4 wires to green plug, is it a square one inside the car? You can leave that disconnected, think one of the pins can be earthed to flash fault codes via EML.
novasrikev
31-03-12, 09:42 PM
yeah it is pal think one is for the eml light?
also what colour plug goes to the knock sensor?
novasrikev
30-06-12, 09:31 PM
up
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.