PDA

View Full Version : Do 1.2 and 1.1.0ltrs have the wires for a Cigarette Lighter?



scott.parker
30-03-12, 07:14 PM
As per title, do the 1.2 and 1.0 models have the wiring and plugs for the Cigarette light to placed in? if so Ive got a C/L unit and if th wires are all there I'll place it in, if not how hard would it be to use some wires like when you piggy back off some for a stereo etc?

Scott

Novasport
30-03-12, 07:19 PM
The loom is plug & play. It is part of a piggy back loom that plugs directly into the fuse box.

scott.parker
30-03-12, 07:33 PM
So if i remove the ash tray i should be able to see them and place it in and plug in and away? just wanted to make sure so i didn't take things apart for no reason mate.

Scott

andyredtop83
30-03-12, 08:33 PM
I had a mark2 poverty spec 1.2i trip and they didnt come with a cigarette lighter. There was a blanking plate where it should be but when i removed it all the cables were there ready for it.

scott.parker
30-03-12, 08:37 PM
Sweet thats good then..

Markd89
30-03-12, 09:33 PM
Mine is a basic spec mk1 1.0 carb'd loon and as said remove the blanking plate and the wires are taped together behind that

maddogdaz666
30-03-12, 11:25 PM
Yep it's all there, well everyone I've had in bits has had it anyway

Nova_Tek
31-03-12, 12:04 AM
I aint found any ciggy lighter wires anywhere! Wanna charge my phone!

Best place to take feed from?

pikey1986
31-03-12, 09:44 AM
when i stripped my mk1 dash out some of the extra wiring wasnt behind the blanks but further back down the loom

Nova_Tek
31-03-12, 10:06 AM
I'll have another look

maddogdaz666
31-03-12, 11:26 AM
Normally taped up to the loom

scott.parker
31-03-12, 08:22 PM
So could if find these wires! could i balls!

So i cut the lighter wires from the Corsa, spliced them, didn't work!

How the hell will i ever do this loon turbo conversion if i cant get a lighter to work!!! lol