View Full Version : Various Nova/Others/C20XE/C20LET Parts...take a look.
Pistol Pete
16-03-12, 02:52 PM
SOME PARTS ARE + P+P IF NOT STATED.
Feel free to make offers, i can only say no!
C20XE/C20LET:
Sump oil level sensor £10 inc. P+P
Dipstick ONLY £10 inc. P+P
Thermostat housing (upper part only) £5 inc. P+P
HT leads and king lead (came off a C20XE) £15 inc. P+P
Heat shield (standard ally Vaux one. Needs a clean/polish) £5 inc P+P
TPS (C20XE, not sure if LET is the same) £10 inc. P+P
SFI box (no rubber donut/bolts) £10 inc. P+P
Alternator (multi rib/V type) £20
Nova Parts:
Rear beam/chassis spring rubber seats £5 inc. P+P
MK2 N/S clear indicator £8 inc. P+P
Rear screen rubber seal £10 inc. P+P
Carbon canistor and holder bracket £10 inc. P+P
N/S interior mirror blanking plate £3 inc. P+P
MK2 heater speed switch £3 inc. P+P
Wiper arm (front) £5 inc. P+P
Front door latch pins x2 £7 inc. P+P
C14SE coil £12 inc. P+P
Rear g/box mount £12 inc. P+P
Plug and play radio loom (c/w wires for F+R speakers) £12 inc. P+P
Parcel shelf supports in grey £15 inc. P+P
Front 1/4 light glass L+R £5 would prefer collection for obvious reasons!
Rear 1/4 glass L+R £10 would prefer collection for obvious reasons!
Non sunroof padding and roof lining fixing bars £30 inc. P+P
Misc:
x2 clutch cables (90170692, has bulkhead bung missing) £12 inc. P+P
Cavalier/Calibra wash/wipe stalk £5 inc. P+P
Vectra B hazard switch £3 inc. P+P
Vectra B air con switch £3 inc. P+P
Vectra B rear heated screen switch £3 inc. P+P
Vectra B re-circ switch £3 inc. P+P
Blue oval side repeaters £5 inc. P+P
High level brake light with some loom £5 inc. P+P
Haynes Manuals:
Vauxhall Cavalier 88-95 (x2) £12 each inc. P+P
Vauxhall Calibra 90-98 £12 inc. P+P
Vauxhall Timing Belt Manual (Draper) £12 inc. P+P
Pistol Pete
19-03-12, 08:05 PM
bttt
Any pics of the thermostat housing mate?
By roof grab rails do you mean the handles? If so I'll take them. Pm me your PayPal addy.
Michael
Pistol Pete
20-03-12, 09:47 PM
Any pics of the thermostat housing mate?
Will get a pic or 2 for you.
By roof grab rails do you mean the handles? If so I'll take them. Pm me your PayPal addy.
Michael
The interior roof handles. Just the handles though. Cant find the plastic pins anywhere. PM en route.
Pistol Pete
23-03-12, 08:21 PM
bttt
Pistol Pete
27-03-12, 09:19 PM
bttt
the underdrive alloy pulley, is it single v or multi rib belt type?
Pistol Pete
28-03-12, 05:36 PM
Single vee.
Can I have pics of bothe sides of the pulley please.
I need to see if it'll work with my dry sump pulley.
Thanks
Pistol Pete
31-03-12, 08:22 AM
Sure. I will get some pics asap.
Pistol Pete
31-03-12, 08:26 AM
Any pics of the thermostat housing mate?
Sorry for the delay...
http://img.photobucket.com/albums/v310/Pete_58/IMAG0109.jpg
Could do with a clean up, but otherwise good.
Pistol Pete
31-03-12, 12:13 PM
Can I have pics of bothe sides of the pulley please.
I need to see if it'll work with my dry sump pulley.
Thanks
Pics...
http://img.photobucket.com/albums/v310/Pete_58/IMAG0113.jpg
http://img.photobucket.com/albums/v310/Pete_58/IMAG0117.jpg
72mm inside diameter of the area that bolts to the crankshaft pulley. lol if that makes sense.
Pistol Pete
02-04-12, 05:48 PM
Bttt
Pistol Pete
04-04-12, 06:28 PM
Bttt
bugger completely forgot! i'll check to see if its ok for my needs tomorrow!
Pistol Pete
07-04-12, 10:09 AM
bttt
Pistol Pete
11-04-12, 07:11 AM
Bttt
Some of this is now on eBay.
Pistol Pete
15-04-12, 09:15 PM
bttt
Pistol Pete
18-04-12, 07:50 PM
bttt
Pistol Pete
21-04-12, 10:55 AM
bttt
Pistol Pete
25-04-12, 11:47 PM
bttt
Pistol Pete
30-04-12, 08:19 PM
bttt
Pistol Pete
10-05-12, 06:41 PM
bttt
Pistol Pete
06-06-12, 02:41 PM
bttt
Off work this week, so may well make a trip to the tip!!!!
Hurry up and buy lol
michael squeak
06-06-12, 10:31 PM
can i take xe heat shield pal. do you have a pic? pm your pp details.. mike
Pistol Pete
07-06-12, 09:31 AM
I'll get a pic. I started to rub it down to polish it, but I decided not to fit one in the end.
michael squeak
09-06-12, 01:21 AM
did you get a pic og heat shield pal?
Pistol Pete
09-06-12, 02:26 PM
No, not yet. Will try and do it ASAP.
Pistol Pete
11-06-12, 05:51 PM
did you get a pic og heat shield pal?
http://img.photobucket.com/albums/v310/Pete_58/IMAG0143.jpg
Pistol Pete
12-06-12, 07:46 PM
can i take xe heat shield pal. do you have a pic? pm your pp details.. mike
PM'd PP details.
Pistol Pete
18-06-12, 08:25 PM
bttt
Pistol Pete
22-06-12, 03:53 PM
bttt
Pistol Pete
30-06-12, 09:32 AM
bttt
Pistol Pete
04-07-12, 08:19 PM
bttt
Fingers crossed i will be at Billing, so can take some of this if people want anything.
Pistol Pete
10-07-12, 09:52 PM
bttt
Pistol Pete
13-07-12, 06:26 PM
Bttt
Pistol Pete
23-07-12, 09:28 AM
Bttt
Pistol Pete
08-08-12, 08:55 PM
bttt
Pistol Pete
14-08-12, 02:15 PM
bttt
you still have roof lining what colour and condition?
Pistol Pete
14-08-12, 06:14 PM
I havent got a roof lining advertised!! I have the bars and the padding, but no lining.
Pistol Pete
19-08-12, 09:03 PM
bttt
Pistol Pete
11-09-12, 03:16 PM
bttt
Pistol Pete
05-10-12, 08:56 PM
bttt
corsamaxi
07-10-12, 09:02 PM
Do you have any external door handles mate?? both sides
cheers walt
Pistol Pete
07-10-12, 09:45 PM
Nope. Sorry.
Pistol Pete
10-10-12, 10:05 PM
bttt
Pistol Pete
16-10-12, 08:50 PM
bttt
novalew
16-10-12, 08:52 PM
did you get payment for bumper blocks pal?
Pistol Pete
16-10-12, 09:00 PM
Yep. Posted them too! Should be with you any day!
novalew
16-10-12, 10:15 PM
Cool cheers pal
Pistol Pete
31-10-12, 08:01 PM
bttt
Pistol Pete
05-11-12, 09:46 PM
bttt
Pistol Pete
10-07-13, 04:49 PM
lol dust the cobwebs off!!
Billing this weekend, so if anyone wants anything let me know before sunday and i can bring it.
Pistol Pete
03-09-13, 05:27 PM
bttt still got some of this junk.... lol
-JELLY-
10-09-13, 07:17 AM
Can u pm me a picture of rear callipers please
Pistol Pete
12-09-13, 12:55 AM
PM'd
Pistol Pete
16-09-13, 08:20 PM
bttt
Pistol Pete
20-09-13, 01:28 PM
bttt
Pistol Pete
24-09-13, 03:18 PM
bttt
Pistol Pete
10-10-13, 12:37 PM
bttt
blue redtop
10-10-13, 11:09 PM
I'll take the xe thermo cover and anything else alloy that can be polished.pm me.
cheers
silk violet
11-10-13, 01:08 PM
Pm'd
Pistol Pete
11-10-13, 02:32 PM
Replied
Pistol Pete
20-10-13, 04:52 PM
Bttt
Pistol Pete
28-10-13, 08:57 AM
Bttt
Pistol Pete
06-11-13, 12:28 PM
bttt
Pistol Pete
30-12-13, 04:21 PM
bttt
floydy13
30-12-13, 04:24 PM
Hi mate, do you still have to nova rear gearbox mount?
is it just the rubber bush or the metal bracket?
Pistol Pete
30-12-13, 04:39 PM
Both. Bush inside the bracket. Will double check i still have it.
floydy13
30-12-13, 05:05 PM
Cool, not to worried about the rubber bush.
I'm looking for the metal part that bolts to the back of the gearbox!
Pistol Pete
30-12-13, 10:34 PM
As in the mount itself? That holds the gear linkage etc?
floydy13
31-12-13, 10:39 AM
Yeah, that's it!
Pistol Pete
31-12-13, 04:22 PM
Ah, so you want the mount not the Bush/bracket assembly?
floydy13
31-12-13, 05:06 PM
Just the metal bit that bolts to the back of the gearbox, that's all I need!,if you have it!?
mutchy_Nova
31-12-13, 09:38 PM
Hi mate do u still have rear spring rubbers? If so is it. 4 u have?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.