View Full Version : Twin webers inlet advise.
Am I correct in thinking for my 1.4 sr engine I will need a manifold with square ports?
If correct are the 1.6 Gsi one and 1.3 sr different as I can hold of either of these but not a 1.4 nv one.
Cheers for any help. :thumb:
Correct.
1.3,1.4sr,1.6 all have different shaped inlet ports.
Although the 1.6 inlet will fit a 1.4sri engine. They both have round ports.
Thank you Adam . So I basically need one specific for a 1.4 sr then.
Cheers.
Yeah.
OR fit a 1.4sri cylinder head and then use a 1.6 T40 inlet.
The head alone will infact give 5-10hp gain over a 1.4sr head
chimp007_uk
20-02-12, 09:26 PM
Have a look at bike carbs link (http://www.ebay.co.uk/itm/Yamaha-R1-carbs-Bogg-brothers-manifold-8v-Vauxhall-/120859228181?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c23c57815)
Yeah.
OR fit a 1.4sri cylinder head and then use a 1.6 T40 inlet.
The head alone will infact give 5-10hp gain over a 1.4sr head
Is the 1.4 Sri head the same as a 1.6 head from a gte / Gsi ?
BRoadGhost
21-02-12, 12:13 AM
Think the 1.4 SRi has larger inlet valves...
Is the 1.4 Sri head the same as a 1.6 head from a gte / Gsi ?
Very similar but the chambers are a different design, so the 1.6 head would give a huge compression ratio drop on a 1.4 block.
womble sri
21-02-12, 08:20 PM
A friend of mine has Sri head and manifold for 40's he wants rid of
A friend of mine has Sri head and manifold for 40's he wants rid of
I will pm you if that's ok mate.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.