How do I get more pull from a 1.4

[Charlieboi]

I want more power from a 1.4 so can I change the gears 2 make it quicker Pls help

[blue_peg_16v]

Throw it in the bin an fit a let lol

Seriously though decent manifold 1.2 head (sounds daft but due to compression chamber shape increases compression) and better fueling I'd go for a pair of twin 40s if you can't get an aftermarket manifold a 1.6 manifold and down pipe will help

[Charlieboi]

Thanks can I go anythink 2 the gearbox for more pull

[pottersrebel]

you could change your diff or gear cluster depending on whats already fitted itll give u more lower end acceleration

[davidfox280585]

I want more power from a 1.4 so can I change the gears 2 make it quicker Pls help
tie it to the back of richs let! lol

[Charlieboi]

What gears and diff would u suggest

[davidfox280585]

my corsa td got more pull when i had a cav gsi on the straight bar behind it,my mate in te cav dropped it in gear and shoved me upto 90 lol private road of course and definately not the m180

[Dan]

13. Txt Type. If u txt type u will b asked nicely 2 type properly. If u refuse 2 comply, u will prob b banned innit! NOTE this is NOT the same as shorthand or poor spelling. We recommend running your post through a spellchecker prior to posing if unsure - it doesn't take long and could save you a lot of hassle from members!

Just a reminder of rule 13. Please take notice of this warning charlieboi

[pottersrebel]

What gears and diff would u suggest
no idea for road use mate but id say if u aint got a 4.1 diff that`d be a good start pretty sure they come in gsi`s???

[Charlieboi]

Think I might try that hahah

[Charlieboi]

Thanks what gears like 1st 2nd 3rd should I use

[Charlieboi]

What about gear clusters

[pottersrebel]

you could try a close ratio cluster which has a 2.14 second gear

[Charlieboi]

What do they come out of

[mr b]

Look at the end of the gearbox just below the 5th gear housing on a flat vertical surface you'll see some numbers and letters this will tell you what gearing you have. Probably have to clean them off with a wire brush to read them post back on here and i'll tell you what your running

[garyc]

I have a CR cluster and 4.1 CWP for sale. inbox me if your interested.

[mowgli]

I have a CR cluster and 4.1 CWP for sale. inbox me if your interested.

this is probably the best option for you.

you need to know what you have in it already. if its an sr, then theres a 99% chance its still got the 4.1 diff but wide ratio box..

if unsure, then the only way is to take it apart & count some cogs

quickest way to get more acceleration is to fit smaller wheels & low profile tyres.

and after doing all this swapping of ratios, you'll find you will maybe have found 1/2 second from 0-80

get new plugs & decent petrol & you'll probably do the same..

[bazil]

quickest way to get more acceleration is to fit smaller wheels & low profile tyres.
.

This, my 1.3 SR was slower when I fitted 15" wheels after removing the 13's so I used 14" wheels with a low profile. It felt better after that.

Look here aswell

http://www.pngclub.com/forum/showthread.php?182786-*INFO*-how-to-tell-F13-ratio-s