PDA

View Full Version : 8v water pump rotating spanner/tool


brucer
16-02-12, 08:35 AM
hey all, anybody know where to get one from? want to do change my water pump and belt on my gte and havnt got the spanner thing.

have had a quick search on googles but cant find one.

cheers

bruce


EDIT; just checked ebay and they got them on there, oops. arnt there different sizes to choose from?
Andy
16-02-12, 09:32 AM
Save your money and use a hammer and chisel.Its coming out to go in the scrap anyway so doesnt matter!
swedge
16-02-12, 10:38 AM
hammer and a long ratchet extention does the job
mowgli
16-02-12, 10:57 AM
i think its more to do with the tensioning up afterwards than the smacking it out..

i just use some plumbers grips.
dan23
16-02-12, 09:44 PM
i ll check what size mine is tomorrow
Nobby
16-02-12, 09:48 PM
i would be very suprised if the water pump spanner would get it out lol Usually a hammer n chisel job im afraid!
brucer
16-02-12, 09:57 PM
as mowgli said, its to do the tension on the belt.

would be great dan if you could, the 2 sizes are 41mm and 46mm i think.
Nobby
16-02-12, 10:12 PM
its do-able without that tool mate but good practice with it i suppose
C612DNM
17-02-12, 08:27 AM
Sykes Pickanose make one (made one). Good motorfactors that stock SP stuff should be able to help.
Makes adjusting them a dream compared to any other method.

Still need hammer/chisel to get knackered ones out though!
dan23
17-02-12, 11:23 PM
its 41mm mate
as said above you will need it to tension your new one
to get the old one out you need a big hammer an a lentgh of 3x2 or similar
brucer
18-02-12, 08:31 AM
just ordered one, thanks dan.

i never asked a question to any one about getting it out! lol
mowgli
18-02-12, 11:05 AM
Just remember to clean up the mating surface really well & then smear some grease round it before putting the new one on
Andy
18-02-12, 11:07 AM
Good luck,this is the remains of the last 8v water pump i changed............

http://i289.photobucket.com/albums/ll211/andyspics_album/DSC00169.jpg

http://i289.photobucket.com/albums/ll211/andyspics_album/DSC00168.jpg
mowgli
18-02-12, 11:11 AM
Did merris help??

Now that was stuck in place.
Andy
18-02-12, 11:14 AM
Indeed it was,that took over an hour to get out.
I blasted it to bits with my lump hammer and cold chisel+drilling.Its lucky it didnt wreck the block really.