PDA

View Full Version : Nova cooling system



boyle_46
30-01-12, 08:36 PM
Hi guys is there a bleeding valve on the nova cooling system ? What's the best way to bleed the system many thanks . Nathan

AndrewJenkins
30-01-12, 09:19 PM
no bleed valves just keep topping it up with coolant once level stops dropping start it up with the heaters on hot keep topping up when needed and check the heater gets hot in the car novas are pretty good at self bleeding once heater is nice and hot i should be pretty good then i usually check it the next morning just to check its settled properly hope this helps

Nova_Tek
31-01-12, 12:51 AM
Most people run engine to operating temp with the coolant expansion cap off, then top up to correct level.

swedge
31-01-12, 06:34 AM
Most people run engine to operating temp with the coolant expansion cap off, then top up to correct level.

thats what i do with the heaters on then top up if needed

jord4n
31-01-12, 05:00 PM
so the temperature plug on the inlet manifold isn't used for getting the air out? as thats what iv always done!

mowgli
31-01-12, 05:25 PM
/\ that is the correct way for a carb nova.....