boffer8
24-01-12, 11:19 PM
Here we have for sale a Vauxhall Nova (8v engines) 4 branch exhaust manifold (4 into 1) and stainless steel system.
The manifold has been heat wrapped using the proper stainless steel ties but has can be seen in the photos has got a big raggy at the top but still in good condition.
The manifold has been repaired in the past due a break near where the connection is but has been done properly and there is a couple of small dints from stones in it too.
The stainless steel system is in good condition with skid plates on the silencers and has been used on a rally car does have a couple of dents here and there but in generally very good condition with plenty of life left in both parts!http://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00061.jpghttp://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00062.jpg
Also have a stainless steel system to go with the manifold,
http://i381.photobucket.com/albums/oo255/boffer8/novaexhaust.jpghttp://i381.photobucket.com/albums/oo255/boffer8/novaexhaust1.jpg
Here is for a sale a Sachs clutch that was from a Nova 1.4 SRI
Has done about 150 miles on the road before the car being scrapped due to rust, is the only part i have got left and comes with the flywheel that it was fitted to for a very short period of time.
Is in very good condition with no chunks or anything out of it and the pressure plate is the same condition.
The springs are green springs on the friction plate and as can be seen from the photos that the writing is still clearly visible and very little marks form the clutch bearing.
Good to be used again, been stored in garage for 6 months.
http://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00064.jpghttp://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00065.jpg
Prices
Manifold and exhaust £110 (may split if both can be sold separately, collection possible, can meet between Leeds and Carlisle)
Flywheel and clutch £35 (also may split if both can be sold, can also be posted but will be expensive due to weight, can meet between Leeds and Carlisle)
The manifold has been heat wrapped using the proper stainless steel ties but has can be seen in the photos has got a big raggy at the top but still in good condition.
The manifold has been repaired in the past due a break near where the connection is but has been done properly and there is a couple of small dints from stones in it too.
The stainless steel system is in good condition with skid plates on the silencers and has been used on a rally car does have a couple of dents here and there but in generally very good condition with plenty of life left in both parts!http://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00061.jpghttp://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00062.jpg
Also have a stainless steel system to go with the manifold,
http://i381.photobucket.com/albums/oo255/boffer8/novaexhaust.jpghttp://i381.photobucket.com/albums/oo255/boffer8/novaexhaust1.jpg
Here is for a sale a Sachs clutch that was from a Nova 1.4 SRI
Has done about 150 miles on the road before the car being scrapped due to rust, is the only part i have got left and comes with the flywheel that it was fitted to for a very short period of time.
Is in very good condition with no chunks or anything out of it and the pressure plate is the same condition.
The springs are green springs on the friction plate and as can be seen from the photos that the writing is still clearly visible and very little marks form the clutch bearing.
Good to be used again, been stored in garage for 6 months.
http://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00064.jpghttp://i381.photobucket.com/albums/oo255/boffer8/Leeds-20120121-00065.jpg
Prices
Manifold and exhaust £110 (may split if both can be sold separately, collection possible, can meet between Leeds and Carlisle)
Flywheel and clutch £35 (also may split if both can be sold, can also be posted but will be expensive due to weight, can meet between Leeds and Carlisle)