View Full Version : Motorsport parts galore
ALL parts relating to the initial car now sold. Only engine bits remaining.
20XE standard inlet £5
SBD oil pump drive gear brand new 0 miles £70 (£100+ new, +vat +del!)
X14XE engine loom, completely uncut £15
C20XE standard pullys, round tooth £8
C20XE rear plastic water bar/pipe thing with with GM rubber S pipe £5
C20XE OEM rocker cover breather pipe unsplit £5
C20XE Oil dipstick £4
C20XE oil pump to block face gasket new £12
C20XE standard fuel rail with standard FPR £5
X4 C20XE cream injectors used £5
x3 C20XE rods £5
C20XE alt bracket & alt tension bracket thingy £10
C20XE Oil temp sender used £10
C20XE Early camblet back plate £8
GM castle nuts & washers pair of each £5
Misc:
Circoli brand new thermostat in box replaces GM 98025557 £14
Corsa C brand new First Line drop link in box £5
2.0 8V AE rod bearings new in box £8
20XE KS rod bearings new in box £15
Corsa C Diesel MANN fuel filter new in box £5
Corsa C rear wheel bearing new in box £10
Bailcast CV boot gaitor new in box £4
Aut-X Corsa C Diesel front brake pads new in box £8
2.0 8v Goodyear cambelt new £8 round tooth
C20XE 86.5mm piston ring set (enough for one piston) new in box £10
Pics of the RFX's please mate
Pics of the RFX's please mate
Wont have any pictures of anything until the weekend Im afraid.
Also breaking a 1995 Impreza Turbo 2000, a 2009 Astra VXR Burg with heavy front end & a 2003 Zaf GSi thats been rolled.
Nova-nation
24-01-12, 08:36 PM
Pics of omp steering wheel buddy? when you can get them at the weekend
Lots of pics are in my build thread in my signature. Cannot get any pics of non WIP items until weekend.
novarally
24-01-12, 09:02 PM
Wont have any pictures of anything until the weekend Im afraid.
Also breaking a 1995 Impreza Turbo 2000, a 2009 Astra VXR Burg with heavy front end & a 2003 Zaf GSi thats been rolled.
Mike, I could be interested in a few bits, I'll drop you a PM.
Mike hello fella the v6 brakes are they still five stud discs or have the been redrilled to 4 stud?
Mike hello fella the v6 brakes are they still five stud discs or have the been redrilled to 4 stud?
No, they were 4 stud discs to start with :thumb: none of this half a job re-drilling shiz.
Would you post them fella?
Would you post them fella?
Yep. I can courier just about anything to anywhere in the UK.
Royston
24-01-12, 09:42 PM
You having a bit of a clearout Mike:eek:
You having a bit of a clearout Mike:eek:
Yea something like that lol
you shud have a pm fella ;)
-JELLY-
25-01-12, 12:42 PM
Pm sent coilovers an topmounts :-)
mk1nova_rich
25-01-12, 03:11 PM
Could you get me pics and price posted for the hydraulic handbrake and the steering boss please?
C20XE engine block with fresh 86.5mm rebore, early crank fitted with new bearings & JRE main bolts £120This need a new crank? As in the engine shown in your projects thread?
novarally
25-01-12, 05:33 PM
PM'd yesterday but still awaiting a reply.
Only just come online, to 17 PM's....
GrpA bells now sold too.
Wilwood 4 pots sold too.
All PM's now replied. More parts also added.
V6 brakes now sold also, will be adding pics etc on weekend once parts removed from car & wheels etc taken out of storage.
PMs also replied to again.
Could be interested in a few things. Regarding the b16 engines are they complete?
Rear disc beam now sold also.
Few more parts added. Most will be going on eBay through out the coming weeks.
Also have a massive assortment of new or nearly new brake pipe fittings, couple of rolls of copper brake line, practically new GM steering wheel puller, barely used brake pipe flaring tool, bender & cutter etc etc.
is the bailey header a twin outlet or single type?
Twin I think Pie, will have to check to be 100% sure though. Its a Corsa B item not a Nova though.
Mr Mike, the brake lines/fittings/flaring stuffs I would be interested in along with your servo, how many moneys would you like?
cheers mike only asking as my corsa sri 8valve has a single outlet type header on it
thanks :thumb:
Mr Mike, the brake lines/fittings/flaring stuffs I would be interested in along with your servo, how many moneys would you like?
Wilwood .625 handbrake servo or entire Corsa pedal servo?
cheers mike only asking as my corsa sri 8valve has a single outlet type header on it
thanks :thumb:
Ill check an let you know any mate as Im not sure myself.
Wilwood .625 handbrake servo or entire Corsa pedal servo?
Standard shonky vauxhall tat for me please :)
pic of google mines has this type
http://i.ebayimg.com/00/s/NTc2WDEwMjQ=/$(KGrHqMOKj0E5vO8LzQlBOhG)DTSZ!~~60_12.JPG
novarally
29-01-12, 06:11 PM
You have a PM reply Mike.
All PM's replied.
Disc beam prov sold pending collection.
Royston
30-01-12, 06:08 PM
pm sent!
what b16 engine you got mate?? might have a friend interested
what b16 engine you got mate?? might have a friend interested
Had two but shifted them already Joe. They dont hang around at all as there very sought after.
Still plenty more left chaps. Lots & lots of this will be going via eBay real soon.
Tonnes of interest but as per the norm, most people on here are never good for there word come money time.
Royston
31-01-12, 07:13 PM
.
TeddyThom
02-02-12, 03:49 PM
EDIT, sorry dude.
Providing it doest funk it down with snow i should have a few pics up etc this weekend.
Coilovers & front bumper now on eBay also. Bailey tank, OMP wheel & Nova/Corsa MOMO boss going on tomorrow evening
Mike, Is the omp wheel a 3 spoke seude jobbie? Any pics at all fella?
Nick.
Mike, Is the omp wheel a 3 spoke seude jobbie? Any pics at all fella?
Nick.
Yes, 3 spoke 320mm dia, cant remember the dish on it tho :/ will have pics by tomorrow evening or sunday Nick.
PS, your parcel (all being well!) should be being collected by courier on Monday 6th :thumb:
Yes, 3 spoke 320mm dia, cant remember the dish on it tho :/ will have pics by tomorrow evening or sunday Nick.
PS, your parcel (all being well!) should be being collected by courier on Monday 6th :thumb:
No worries regarding the parcel etc....pm on route regarding steering wheel fella.
Nick.
OMP wheel & boss now sold.
To those awaiting deliverys, car is currently under a few inchs of snow so thats scuppered a lot of what I was wanting to do to it this weekend as I was planning on totally breaking down :/ as informed via PM's there will be a delay in dispatch/receive like started prior sale etc.
did you check the bailey tank mike?
did you check the bailey tank mike?
Ah yes mate its a double outlet for a 16v motor chap.
ok no probs
thanks for checking mike :thumb:
Few more bits gone now. C'mon chaps Im only upto £1100 so far, still plenty new/nearly new parts left on this shÃ*tter yet.
Shell will be going FOC aswell, has welded in seat rails, stitch weld bay & tunnel, light weight looms etc etc etc.
autoworksnovasport
08-02-12, 10:23 PM
were are you based??
were are you based??
Midlands, 5 mins from J1 M54.
autoworksnovasport
08-02-12, 10:29 PM
il grab the shell off you when you want it gone
il grab the shell off you when you want it gone
Long time yet.
Youll need to bring your own rear beam/rear susp, wheels & front susp. No panels are included just glass & fuel tank. Interior is dash only.
Dont worry if you decide you dont want, as Im actually looking forward to Stihl sawing it into four & putting into a bailer :) either way its gotta go as its not wanted anymore & I cant take with.
autoworksnovasport
08-02-12, 10:42 PM
i will take it not to worry about running gear ive got a winch ;)
i will take it not to worry about running gear ive got a winch ;)
Congrats. But I dont think you'll be dragging it across my driveway chap. All 50 odd foot of it.
autoworksnovasport
08-02-12, 10:48 PM
ill bring a dolly aswell then
messaged you a few times mate, ill take the handbrake setup & lines
hi buddy have you got a pair of corsa inner arch covers?
hi buddy have you got a pair of corsa inner arch covers?
Standard GM plastic inner shÃ*t gaurds or kevlar works type inner shÃ*t guards?
messaged you a few times mate, ill take the handbrake setup & lines
Its still attached to the car will let you know once removed, lines are not for sale.
the kevlar ones
Havent made any in a while, got none left in stock either.
Up & very nearly away.
Good sizable chunk of parts still avaliable from this.
ant.lane
13-02-12, 07:53 PM
have u still got the seats and the fibre glass bonnet with hh air intake
have u still got the seats and the fibre glass bonnet with hh air intake
Yes. Have potential buyer for seats though.
ant.lane
14-02-12, 10:13 AM
Il come and buy both seats and bonnet at weekend if want
Il come and buy both seats and bonnet at weekend if want
Bring me £625 and there all yours.
Aerocatchs have x3 keys (inc).
Any recent pics of the Gaz's mike? What I.D are the springs?
ant.lane
14-02-12, 07:55 PM
ok mike im intrested my number is 07525360201 if wana tx over ur address it b sat or sun i no more in few days
Any recent pics of the Gaz's mike? What I.D are the springs?
GAZ's are currently on eBay chap with a very upto date pic. Spring ID is whatever they are from the factory lol 2 1/4 inch I tihnk??
ok mike im intrested my number is 07525360201 if wana tx over ur address it b sat or sun i no more in few days
Where abouts are you travelling from?
Just to add, the 20XE block is overbored to 86.5mm, its had brand new Glyco main bearings, brand new JRE main cap bolts, brand new GM water pump, brand new GM oil pump with SBD main drive gear (bought new SBD), brand new oil pump to block gasket from JRE. Crank turned out to be fine, tight spot was from incorrectly moulted oil pump. Also has brand new alloy single V pulley fitted. Can inc brand new single V alloy alternator pully & brand new high torque starter motor with this bottom end for the right price.
ant.lane
14-02-12, 09:06 PM
harlow essex
definately no offers on the GAZ's ?
definately no offers on the GAZ's ?
Unfortunatly not mate, there on eBay with 18 days left & well over 30 watchers, quite confident they'll sell for asking price.
No harm in asking :) Don't suppose you got an XE fuel pump?
mk1nova_rich
15-02-12, 04:15 PM
Are the harnesses 3"?
cornish
15-02-12, 10:27 PM
PM Sent.
Are the harnesses 3"?
No, But 3" harnesses on a road car/track is, IMO, a total waste of cash anyway.
No harm in asking :) Don't suppose you got an XE fuel pump?
16XE yes lol
16XE yes lol
Even I have one of those somewhere buried in the garage lol
You read that PM yet? :p
Up.
Lots of stuff being collected for dispatch on Monday 27th (Colin's & Nick's parts)
reecegsi
20-02-12, 09:04 PM
Would you sell tie bar polybushes seperate? Best price on the 4x gsi arches as i just want the front 2 and all clips on front ones intact?
Would you sell tie bar polybushes seperate? Best price on the 4x gsi arches as i just want the front 2 and all clips on front ones intact?
No.
All prices are as advertised.
reecegsi
21-02-12, 05:57 PM
Ok where are you located mate?
darragh792
22-02-12, 02:04 PM
hii mate are the braided lines still there if so how much posted to ni
Up.
More parts going on eBay etc tomorrow.
cornish
22-02-12, 10:42 PM
Mike did you get my PM's?
Few more minor bits added.
Couple more bits going on eBay this evening.
novarally
23-02-12, 06:39 PM
Mike.
No sign of my bits yet? Starting to get a little concerned.
Thanks,
Colin
Mike.
No sign of my bits yet? Starting to get a little concerned.
Thanks,
Colin
Hello Colin, yours & Nicks are being collected Monday. Removing them tomorrow just need to find a box big enough for them now.
Flat fly, V pully, baffled sump, standard pistons, standard rods, coilovers & bailey tank all now on eBay. Harnesses will be going on either tonight or tomorrow night starting at 99p.
Will be listing a lot more over the coming weeks.
reecegsi
24-02-12, 03:32 PM
Pm'd
scott.parker
24-02-12, 04:03 PM
Mike did you get my PM's??
Mike did you get my PM's??
Yeo just never got round to replying. Got the front lines off just gotta get round to removing the rears at some point.
darragh792
28-02-12, 05:32 PM
HI mate have you the braided lines for the front and rear? How much posted to northern ireland
HI mate have you the braided lines for the front and rear? How much posted to northern ireland
There prov sold pending removal.
Southie
01-03-12, 07:06 PM
Mike, wouldn't it be better for you to pay for trading in here then you could post your eBay links up ;)
Mike, wouldn't it be better for you to pay for trading in here the you could post your eBay links up ;)
I dont do enough trade via here to make it worth my while though else Id consider it lol
Southie
01-03-12, 07:10 PM
You'd probably do more selling though if you did, Colin makes a living out of it so it must work ;)
You'd probably do more selling though if you did, Colin makes a living out of it so it must work ;)
Colin has a day job to, like me lol Ive got a lot of things coming through for retail that arnt Vaux related as its to small a market (IMO). Once this heaps gone its all hands to the rotors so to speak.
Southie
01-03-12, 07:16 PM
Oh well it was just a thought, btw I don't need anything so I'll leave you in peace lol
Oh well it was just a thought, btw I don't need anything so I'll leave you in peace lol
Dont get me wrong Ive thought about it a lot though. At the minute I just havent got enough time to do anything :/ Im only on here now when waiting for things to post cure lol like now.
Part the reason for getting rid of this car is lack of time. ALong with no intention of actually using it. And no need for it lol was a nice tidy development mule tho. You on my facebook South??
Southie
01-03-12, 08:16 PM
Nah I'm not even on feacesbook at all lol
Up.
More stuff been shipped today & more going out to buyers Monday. Will be removing more parts this weekend work load prevailing.
Up.
Would consider taking £offers for the rolling shell with lots of new/expensive parts still attached as Ive not got much time to remove them. PM if interested.
Photos of wheels will be posted soon once there out of storage too. Also have x4 15" TH's Ive recently aquired. Should have some flat face type MO's arriving soon too.
scott.parker
08-03-12, 11:27 PM
Dude you got them lines off yet??
Scott
Dude you got them lines off yet??
Scott
Nope lol been away all weekend only just got home!
Up. Load more stuff going via eBay this weekend inc Sealey engine crane, low entry high lift 2.5tonne trolly jack, Comp TH's, RFX's & Corsa GSi kit etc.
reecegsi
16-03-12, 08:35 PM
Still got gsi arches all clips intact let me no
kenny_afh
17-03-12, 07:30 PM
PM sent re seat mounts 2 days ago but no reply...
Rolling shell will be on eBay mid next week when Im back from my holidays with everything highlighted in red included in the asking price (parts alone total £1346.50, all still fitted to car).
Car is currently SORN until Feb 2013. 1999 T reg, 67k miles, 5 former keepers, HPi clear. Has welded in seat rails, welded in harness eyelets, welded in rear brace, lots of carbon blanking panels in dash/floorpan/bulkhead etc, engine bay stitch welding done, all unused bracketry removed, lightweight motorsport wiring looms fitted, dash/centre console fitted, internal copper brake lines through out with hydraulic handbrake fitted, all glass & bodypanels fitted, plates/V5C/Vin tags all present & correct. Fuel tank, OEM lines & pump fitted (tank is half full of high octane unleaded @ 3 months old aswell) Will be supplied rolling on standard front suspension & brand new billys on rear. No steering wheel though.
Sensible offers ITRO of £1000. (which is a relative bargin considering how many hours prep work its had). Im in no rush to sell & could easily continue braking this & selling all the other associated parts which total a hell of a lot more then £1k asking price.
Up. Seat mounts now on eBay BTW.
scott.parker
22-03-12, 07:55 PM
Mike are you taking the flexi brake pipes off dude?
Mike are you taking the flexi brake pipes off dude?
Yes mate.
Mike does the C20XE head have the lifters in? Are they good or havent you got a clue? lol :thumb:
Mike does the C20XE head have the lifters in? Are they good or havent you got a clue? lol :thumb:
Yes has lifters, dont know how good they are though.
scott.parker
27-03-12, 11:04 PM
Yes mate.
Well can i have the feckers then! lol
Will also have these for sale very soon....
Astra Coupe SE2 17's with 215/40/17's fitted. All the tyres have between 3 & 6mm of tread. All of these rims have minor kerbing around the rims, some worse then other but will get better pic once there out of storage. x4 centre caps. Fully balanced & ready to go.
http://i80.photobucket.com/albums/j181/mikenova/SE2.jpg
http://i80.photobucket.com/albums/j181/mikenova/SE22.jpg
Sidemounts & XE mounts now sold.
Will be boshing a load more XE engine & other parts of this on eBay through out this week.
Tiger13
08-04-12, 10:01 PM
Hi mate, Do you have all the bits needed to do a full c20xe conversion? Im not sure whats needed exactly but if you could let me know and a price it would be appreciated!!
Do you have all the bits needed to do a full c20xe conversion?
Nope.
Sensible offers on parts please chaps as want to buy a new car so want all this junk shifting before I buy another motor.
autoworksnovasport
11-04-12, 10:25 PM
how you getting on with the shell mike??
how you getting on with the shell mike??
Not even touched it. Still loads of parts to come off it yet when I have the time.
Oil cooler now sold also.
Once the weather gets a bit better the rolling shell complete with everything highlighted in red (& a few other bits included but not listed) will be going on eBay starting at 99p.
Offers welcome on all parts as its all going to fund a new race car so the more monies the betterer.
reecegsi
26-04-12, 12:34 AM
metal gear linkage bar and braided lines still got these?
metal gear linkage bar and braided lines still got these?
Still got both but brake lines are going with the car now. Gear linkage bar isnt a Rosejointed type end fitting, its the plastic ball type fitting.
scott.parker
03-05-12, 12:15 AM
Dude i really want these brake pipes..
Scott
reecegsi
03-05-12, 08:24 PM
got an oil cooler?
got an oil cooler?
Nope.
If the weather holds tomorrow the car & quite a large spares package is going up on eBay tomorrow evening for quite a sensible Buy It Now price. Supplied as a rolling shell with everything highlighted in red in post #1 inc.
Nitrous oxide kit is now being kept & fitted to my new car though.
Gen GM Sump gasket kit now sold also.
Both XE rocker covers now sold.
Going on eBay tonight is ~
Brand new GM 20XE/LET manifold breather
Brand new XE/LET alloy alternator pully
Built up XE head (no cams)
XE T/B (used) with TPS.
XE oil pick up pipe (used)
Early XE cambelt back plate (used)
Corsa B alloy rad brackets. (used)
Alloy V pully now sold.
Listing even more parts tonight also.
what b16 engines are they mate the b16a? what price you looking for the engines? pm me thanks mike
what b16 engines are they mate the b16a? what price you looking for the engines? pm me thanks mike
Already sold chopper.
Head, foot tray & rear wiper motor now sold.
RFX's currently on eBay.
The rolling shell complete with everything listed below & some other bits & pieces will be avaliable very soon for not a lot of money.
Corsa B steering rack £10
Corsa B headlights (pr) £15
Corsa B rear lights (pr) £15
Corsa B DTM mirrors with base plates £5
Corsa B radiator used £15
Carbon composite nvaigator foot tray £60
Corsa B Polwerflex poly bushs for tie bars & bottom arms (used but 0 miles, cost me nearly £90) £50
Corsa GSi 22 spline shafts £50
Corsa B F/G bonnet with HHMS intake & carbon kevlar slam panel, fitted with new locking aerocatchs £325 the lot (just under £500 worth new for this lot alone)
Corsa GSi front bumper with GSi rubber splitter, stainless steel pins attached £45
Corsa GSi F/G replica side skirts, unfitted new £45
Corsa GSi arch bits x4 in star silver £35
Corsa Sport rear bumper in star silver £25
BILSTEIN Tarmac spec rear suspension, mostly new from HHMS, with bilstein springs an adjusters etc, new upper bush's £220(bargain price considering the shocks are £118+vat each!)
Corsa B disc braked rear beam, fully built up from all new parts£120
Goodridge braided flexis with s/s fittings not the sh1tty zinc coated fittings, new 0 miles £35
Corsa B hydraulic handbrake setup with Wilwood m/c & wilwood bias £60
Corsa B rear disc conversion MTech handbrake cable kit used £50
MISTEC plumbed in anti fire, charged & on green, needs re-cert upto date, comes with all nozzles, pull cords etc etc £90
Tigra scuttle panel £12.50
Corsa B star silver front wings good cond £15 each
Corsa Sport 3 spokes with centre caps & x2 locking keys, 4 inflated but perished tyres fitted £40
Corsa carbon fibre fuel pump cover £10
Corsa gearlinkage £10
Corsa B alloy rad brackets, pair unbroken, gloss black £4
Slim line rad fan (OEM aircon fan) dia is TBC £15
hi i will take
Goodridge braided flexis with s/s fittings not the sh1tty zinc coated fittings, new 0 miles £35
can u pm payment details thanks
hi i will take
Goodridge braided flexis with s/s fittings not the sh1tty zinc coated fittings, new 0 miles £35
can u pm payment details thanks
These are being sold with the car.
To answer a few qeustions....
Shell comes completely panneled & glassed, dash & centre console in place, fuel tank/lines/pump fited & recently half filled with fuel too. Standard front suspension fitted, bilstien rear with billy springs & ally adjusters, front & rear lights fitted, wiper motor/linkage etc, welded in rear brace, welded in seat rails, stitched engine bay. Obviously has steering rack (and new TRE & TCAs) all still fitted.
Also inc is:
Standard rad with some random hoses
Standard engine mount brackets
Standard engine mounts
Set of brand new locking lug nuts for studded hubs
All four hubs are studded not OEM nuts
NO exhaust system fitted at all
Has no front brakes at all what so ever
Disc braked rear axle fitted with handbrake cables fitted & bias'ed hydraulic handbrake setup fitted
There are some other minor odds & ends inc like gear linkage, rad brackets yadda yadda.
OITRO of £750 or £950 & ill chuck in a set of 15" Revoloution RFX's to boot.
C'mon chaps, offers please, seen something I really want but not got enough room until I can shift this!!!
Up up still got some odd few bits & pieces of this left yet.
RFX's & 22 spline shafts now sold also.
just vaux trev
21-06-12, 10:15 PM
ill take corsa gsi bumper with postage if still available bud, pm plz
Your only in Stoke, its like 25 miles..
just vaux trev
23-06-12, 04:16 PM
Your only in Stoke, its like 25 miles..
no location listed,
is the corsa gsi bumper still available?
ah yea, hes pretty much cannock, about 2-3 miles from J11
All pms now replied again.
Any pics of the XE block? Proof of new bearings and bolts I.E reciepts? would you send it on a pallet mate? Cheers, jake.
Any pics of the XE block? Proof of new bearings and bolts I.E reciepts? would you send it on a pallet mate? Cheers, jake.
No pics but got a receipt from JRE somewhere. And obviously visually its pretty obvious there brand new too. Not interested in putting it on a pallet no, theres a few people interested in on here & elsewhere so Im in no rush to sell.
SBD drive gear & XE block now prov sold.
Still got a lot of the engine parst available.
£500 ono takes the whole car inc everything highlighted red in post#1 plus some other bits & peices. Complete rolling/panelled shell, just need to bring a steering wheel or some locking pliers. Trailer collection only.
Whole car is now currently on eBay ending in just under 3 days. Currently at £100, proper bargain to be had here people!!
Up. still got engine parst avaliable.
leefowler
15-07-12, 10:41 AM
Is the block and starter motor still available?
Lee
leefowler
15-07-12, 10:49 AM
YHPM.
Lee
Just these bits left now chaps.
More 20XE engine parts now added aswell as other misc new parts.
High Torque starter now sold.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.