View Full Version : vectra b immobiliser
have just fitted an x16xel into a nova and am having some problems with immob wiring,
could someone with a haynes or autodata cd be able to tell me the ecu pins for the wiring from the transponder, have the main ones sorted like ign live, batt live and earth am stuck on the signal wires and the rest of them??
thanks
Southie
20-01-12, 08:01 PM
Have you looked at the diagram Adam made in this thread?
http://www.pngclub.com/forum/showthread.php?129462-*HOW-TO*-fit-a-Smallblock-XE.-(1.4-1.6-16v)&p=1317050&viewfull=1#post1317050
ye but need to know pin no on the ecu
got diagrams sorted now, but need to know if i need the speedo signal to the immobiliser, i dont have a speedo drive on the gearbox that was fitted to this engine, and it came through the abs on the donor vectra, this is in a rally car if this makes any difference
K405JMB
22-01-12, 09:40 PM
It wasnt needed on my x25xe conversion that had a speed signal to the immobiliser
thanks for that, got the same reply on another forum, so it should work out
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.