PDA

View Full Version : 1.3 sr engine help please



bakerznova
14-01-12, 08:25 PM
as above
started fitting my water pipes etc
fitted the front 2x which go to the radiator
stuck on the back pipes so just a question really is this right ? or wrong ?
pics....
http://i39.tinypic.com/5uijrp.jpg

http://i42.tinypic.com/537yf.jpg


http://i41.tinypic.com/2vcxj.jpg
does that black pipe go into one of the ports on the carb ? ^^^


http://i44.tinypic.com/a4l7bs.jpg

also where does this white plug go ?
http://i41.tinypic.com/24npp8w.jpg

and also unsure what goes into the port labelled "1" and also where the black pipe goes to from it ?

http://i43.tinypic.com/mctesn.jpg

any help will get + rep

thanks

Novasport
14-01-12, 08:29 PM
Black wire is usually ignition live.

Blue unit is a fuel evaporation tank

bakerznova
14-01-12, 08:32 PM
Black wire is usually ignition live.

would it be in the haynes manual do you know ? if so i could borrow a mates

do you know wether or not the pipework is right ?

thanks

Novasport
14-01-12, 08:40 PM
Just checked Haynes and it is an ignition live for the automatic choke and the other item, it traces back to Fuse 18.

bakerznova
14-01-12, 08:44 PM
Just checked Haynes and it is an ignition live for the automatic choke and the other item, it traces back to Fuse 18.

thanks mate

"You must spread some Reputation around before giving it to Novasport again."

Novasport
14-01-12, 08:51 PM
Pipe from passenger side outlet on matrix goes to bypass pipe behind block, other side goes to the carb with the take off for the auto choke I think...

http://img.photobucket.com/albums/v305/NovaSport/pipes.jpg

Ignore pipe 1 as it is replaced with the one pictured seperately when you have auto choke