BenH
12-01-12, 07:58 PM
Hello,
can someone just double check iv plumbed my expansion tank in correct, should i blank off what i have nothing connected too? see pics!
here goes
Pic1- as rad had no overflow i used a filler kneck with one build in-this has a silicone pipe that goes to picture 2
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0566.jpg
pic2
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0567.jpg
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0569.jpg
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0568.jpg
so Do i leave the other side of the expansion cap as it is or connect pipe from it to feed back into the sytem? or blank it off?
if anyone can shed some light thatd be a massive help
Thanks
Ben
can someone just double check iv plumbed my expansion tank in correct, should i blank off what i have nothing connected too? see pics!
here goes
Pic1- as rad had no overflow i used a filler kneck with one build in-this has a silicone pipe that goes to picture 2
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0566.jpg
pic2
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0567.jpg
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0569.jpg
http://i741.photobucket.com/albums/xx59/RHphotography/SAM_0568.jpg
so Do i leave the other side of the expansion cap as it is or connect pipe from it to feed back into the sytem? or blank it off?
if anyone can shed some light thatd be a massive help
Thanks
Ben