can someone please check my e16se wiring

[Curtoise]

thought it would be best to get a second opinion on my wiring,

as my rev counter doesnt work and i cant seem to get it to work

this green wire coming off the gte loom is currently running to the top right spade on the coil.....
http://i551.photobucket.com/albums/ii448/curtreid8/IMAG0118.jpg

and where it is plugged to

http://i551.photobucket.com/albums/ii448/curtreid8/IMAG0119.jpg

and i am running my ign live from the old coil plug

http://i551.photobucket.com/albums/ii448/curtreid8/IMAG0120.jpg

now all runs well except my rev dial..... this is where the problem starts.

i have the green wire from my original loom which used to go to the coil plug blanked off at the moment. and when i connect it to the coil it cuts the engine out?!

[shed-on-wheels]

im sure you conect it to the green wire from the gte loom bud providing you got the right coil for the loom to plug in to

[Curtoise]

yeah thats what i thought, but that green wire has to go to the coil to make it run

[shed-on-wheels]

thats starnge never heard of that one before all i have ver used on a coil is iirc ignition live and earth thaqts to make it run like

[Curtoise]

yeah its really strange, i remember it did originally start without that connected, but it reved high and now it only starts and runs with this wire connected

[shed-on-wheels]

hmmm isit he right coil for it as mine was round like a mini coil if you get me not the little block ones