ST-eater
31-12-11, 07:26 PM
hi all...
I now sadly have to split my recent project...
Its a 20xe engine which has undergone a full rebuild... Its still in pieces to open to inspection.. However if your not sure what your doing i can build it & time up no problems.
The block has been inspected & honed by an engineering company..
New rings, new big end & main bearings, new ARPS, new gaskets, new oil seals, new everything pretty much.. Stem seals, a new valve due to pitting on one..
Early pistons & crank...
Breather mod has been done
The head has been stripped, diamond skimmed, rebuilt and painted...
Currently looks like this...
(http://imageshack.us/photo/my-images/703/88582941.jpg/)
(http://imageshack.us/photo/my-images/703/88582941.jpg/)http://img703.imageshack.us/img703/751/88582941.jpg
http://img825.imageshack.us/img825/5093/42066718.jpg (http://imageshack.us/photo/my-images/825/42066718.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img850.imageshack.us/img850/2656/e12q.jpg (http://imageshack.us/photo/my-images/850/e12q.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img221.imageshack.us/img221/4236/e13d.jpg (http://imageshack.us/photo/my-images/221/e13d.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img714.imageshack.us/img714/9794/010sji.jpg (http://imageshack.us/photo/my-images/714/010sji.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img32.imageshack.us/img32/8948/g16q.jpg (http://imageshack.us/photo/my-images/32/g16q.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Currently, the only things that needed to be sorted to get the engine up and running is the head bolts fitted (supplied & gen vx).. and the cambelt fitted & timed... The only thing i am waiting for is the sump gasket, hence why it is in two pieces still..
The engine cost me £350 to buy, and the parts to rebuild were around £350, as everything was bought from a mix of QED, IVC and CAS. I know im not going to get £700 what i spent, however im open to offers.. £700 ono...
The zzr1100 carbs & mbe management...
MBE Is Basic, However its the SBD one, which adjusts the advance and uses standard bits... Much better than the cav dizzy idea apparently... Ive found the wiring instructions.. Simply just 4 wires... MBE £SOLD
Carbs £100
http://img515.imageshack.us/img515/7046/008dn.jpg (http://imageshack.us/photo/my-images/515/008dn.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Uploaded with ImageShack.us (http://imageshack.us)
Im currently awaiting a manifold to come back to me, this will then be up for sale too
Have a digi dash, with wiring & Transducer, working £65
Have early FP ecu with all the wiring loom, fully working £150 (not sure if is chipped or not)...
Fuel Rail 3bar injectors £30
Il update with the other bits...
Located in Nuneaton, but can also be available in Hinckley
I now sadly have to split my recent project...
Its a 20xe engine which has undergone a full rebuild... Its still in pieces to open to inspection.. However if your not sure what your doing i can build it & time up no problems.
The block has been inspected & honed by an engineering company..
New rings, new big end & main bearings, new ARPS, new gaskets, new oil seals, new everything pretty much.. Stem seals, a new valve due to pitting on one..
Early pistons & crank...
Breather mod has been done
The head has been stripped, diamond skimmed, rebuilt and painted...
Currently looks like this...
(http://imageshack.us/photo/my-images/703/88582941.jpg/)
(http://imageshack.us/photo/my-images/703/88582941.jpg/)http://img703.imageshack.us/img703/751/88582941.jpg
http://img825.imageshack.us/img825/5093/42066718.jpg (http://imageshack.us/photo/my-images/825/42066718.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img850.imageshack.us/img850/2656/e12q.jpg (http://imageshack.us/photo/my-images/850/e12q.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img221.imageshack.us/img221/4236/e13d.jpg (http://imageshack.us/photo/my-images/221/e13d.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img714.imageshack.us/img714/9794/010sji.jpg (http://imageshack.us/photo/my-images/714/010sji.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img32.imageshack.us/img32/8948/g16q.jpg (http://imageshack.us/photo/my-images/32/g16q.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Currently, the only things that needed to be sorted to get the engine up and running is the head bolts fitted (supplied & gen vx).. and the cambelt fitted & timed... The only thing i am waiting for is the sump gasket, hence why it is in two pieces still..
The engine cost me £350 to buy, and the parts to rebuild were around £350, as everything was bought from a mix of QED, IVC and CAS. I know im not going to get £700 what i spent, however im open to offers.. £700 ono...
The zzr1100 carbs & mbe management...
MBE Is Basic, However its the SBD one, which adjusts the advance and uses standard bits... Much better than the cav dizzy idea apparently... Ive found the wiring instructions.. Simply just 4 wires... MBE £SOLD
Carbs £100
http://img515.imageshack.us/img515/7046/008dn.jpg (http://imageshack.us/photo/my-images/515/008dn.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Uploaded with ImageShack.us (http://imageshack.us)
Im currently awaiting a manifold to come back to me, this will then be up for sale too
Have a digi dash, with wiring & Transducer, working £65
Have early FP ecu with all the wiring loom, fully working £150 (not sure if is chipped or not)...
Fuel Rail 3bar injectors £30
Il update with the other bits...
Located in Nuneaton, but can also be available in Hinckley