View Full Version : wheel offset help
i am using a vectra b subframe in the back of my rwd nova but the wheels are about 10mm to wide, they are 15" with offset of 49. what wheels could i use that would fit bmw?
THANKS
BMW wheels are lower ET so it'll make it wider
ok so i will need a higher offset of 49 then, just need to find out now what car uses a higher offset
Novasport
26-12-11, 07:34 PM
BMW wheels are lower ET so it'll make it wider
A lot of the newer BMW's have quite a high offset similar to Vauxhall now but are all 5 stud. If you need 4 stud, new Mini wheels are ET45
afaik there's not much about with a higher offset than et49 - might be able to get some wellers or similar as they were custom made in all sorts of weird combinations
Cant you gain the clearence from machining the wheel or modifying the arches more?
agreed et49 is pretty high. can you fiddle with the camber at all?
i will try and move out the arches and run slight camber
Nova_Tek
27-12-11, 06:31 PM
Old Porsche rims are normally higher than 49. Some IIRC in the 60's but 5 stud of course
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.