Rich
22-12-11, 06:31 PM
small nova washer bottle £5
Cavalier turbo servo and master cylinder. Good for you cav owners for a straight swap, or with a little modding to the connecting rod would be a great upgrade for a nova. I made a start but would need a spacer made or welded to fit a nova. Painted metallic grey £25
Wilwood brake bias valve, new and unused. I also have a fully set of braided brake lines (complete lines not just the flexi replacement). No fittings included for front calipers, i was going to use rear discs so unsure if the fittings will go into drums. I think the fittings the same but would probably need to modify the lengths. Was used with the cav mc so only 2 outlets. £60
DSOP style downpipe, unfinished. Would need modifying to fit your cars exhaust, some of the weld could do with a bit of tidying if you are fussy and o2 sensor hole needs adding (boss included). main pipe is 2.5" and the wastegate pipe is 1.75. Will also include a flexi joint and a couple of extra bends (45 deg i think) Made to fit tight to block/sump for clearance £90
http://i124.photobucket.com/albums/p24/novarich/DSC00253.jpg
http://i124.photobucket.com/albums/p24/novarich/DSC00321.jpg
http://i270.photobucket.com/albums/jj86/Project_FLO/Breaking%20nova/IMG_0047.jpg
Cavalier turbo servo and master cylinder. Good for you cav owners for a straight swap, or with a little modding to the connecting rod would be a great upgrade for a nova. I made a start but would need a spacer made or welded to fit a nova. Painted metallic grey £25
Wilwood brake bias valve, new and unused. I also have a fully set of braided brake lines (complete lines not just the flexi replacement). No fittings included for front calipers, i was going to use rear discs so unsure if the fittings will go into drums. I think the fittings the same but would probably need to modify the lengths. Was used with the cav mc so only 2 outlets. £60
DSOP style downpipe, unfinished. Would need modifying to fit your cars exhaust, some of the weld could do with a bit of tidying if you are fussy and o2 sensor hole needs adding (boss included). main pipe is 2.5" and the wastegate pipe is 1.75. Will also include a flexi joint and a couple of extra bends (45 deg i think) Made to fit tight to block/sump for clearance £90
http://i124.photobucket.com/albums/p24/novarich/DSC00253.jpg
http://i124.photobucket.com/albums/p24/novarich/DSC00321.jpg
http://i270.photobucket.com/albums/jj86/Project_FLO/Breaking%20nova/IMG_0047.jpg