PDA

View Full Version : nova 1.6 8v



martsnova
18-12-11, 06:46 PM
:)hi does any one no anything about putting mega jolt on my nova rally car and what i need after throwing my distributor in the bin cheers sorrys its 1.6 8v on 45 webers

swedge
18-12-11, 06:57 PM
you needs a 36-1 trigger wheel, mine came from http://www.trigger-wheels.com/store/ who are owned by autosport who make the megajolt system
you need the megajolt ecu
crank sensor from a 90's ford
coilpack from a 90's ford and leads to match
either a take off from the maifold or fit a tps sensor so the ecu can take a load reading
and a bracket to hold the crank sensor

and ofcourse you need a loom made up

have a look in my project thread (link in my sig) im running megajolt on a 20seh

tom reid is the main man to speak to though he supplied me with nearly everything including the loom

http://www.autosportlabs.net/MegaJolt_Lite_Jr._-_A_DIY_Programmable_EDIS_Ignition_Controller_-_Users_Welcome!

mowgli
18-12-11, 07:33 PM
also was the original dizzy a gte one?? if so i'd have bought it off you, but not if its got old food scraps & cat litter on it....

martsnova
18-12-11, 07:39 PM
cheers that helps what sort of money are we looking at to set it up and can anyone map it up thanks oh it had a old black cap type dizzy on it

mowgli
18-12-11, 07:44 PM
contact tom reid about this, as already said...

he's also fairly local to you, & knows his stuff..

seriously if you have any engine bits left over, i'd be interested.