Clutch/release bearing trouble

[Leeboo]

The release bearing on my 1.2/F10 has been noisey for a long time.. all of a sudden now its very hard to select gears.

It will obviously be needing a release bearing. But if it also ends up needing a clutch, will one off a 1.4/F13 fit?

Bit of a silly question maybe as the flywheels are probably different sizes but thought I'd ask as I have a good one! Thanks.

[mowgli]

the f13 type clutch will be larger, as the f13 bellhousing/flywheel assembly is larger

stick to the 1.2 f10 one.

edit... i followed my linky to the valeo catalogue, and they reckon the c14se runs the same clutch as the 1.2, so i'm now not sure... the 1.2 has a 190mm clutch. measure the 1.4 one, and follow my online catalogue linky

[Leeboo]

Thanks for that.. I will check up on it then! The clutch I have is from a 1.4 SPi / F13 from a corsa B.. Rep'd

Your link says they are both 190mm .. happy days!