Plugs not connected

[pyromaniac_yeti]

Right, as far as i can see theres three that arent connected

A three pin that matches up with a socket on the speedo drive.

A two pin that matches with a socket on the gearbox but doesnt reach.

And a massive three pin that i cant find jack to connect it to.

Ive got a battery light on, though the alternators good, ive got a brake warning light although all the brakes all good & my reverse light doesnt work (think thats what the plug in the box is for though)

There might be more, but im not sure. Only found out cause the ****ing speedo drive fell out due to never being bolted down!!

[pyromaniac_yeti]

I think that this:

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/317012_10150969290210054_816330053_21936207_170982 455_n.jpg

Goes into this:

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/387526_10150969290455054_816330053_21936211_158994 0380_n.jpg

And that this:

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/388726_10150969290285054_816330053_21936208_132175 0380_n.jpg

should be connected to the reversing switch on the box, which if im right is here:

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/305894_10150969290290054_816330053_21936209_118023 3806_n.jpg

But then where on earth is this thing meant to connect to??

I mean its fairly heavy gauge cable so IDK if that could have something to do with the warning lights if its not earthing something its sposed to be.

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/389031_10150969290360054_816330053_21936210_286951 431_n.jpg

:confused:

[Iain]

Fill us in on some info mate... Are you doing an engine conversion? Is this a new loom? What engine is it? etc

[pyromaniac_yeti]

1.5TD, im lead to belive its from a corsa after the original engine blew up. Bought the car this way. Got no idea what loom it is, however im guessing corsa as i cant see any reason why there would be a sensor on the speedo drive for a mechanical pump TD with no cruise control

[pyromaniac_yeti]

Bump :(

[windfreek]

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/388726_10150969290285054_816330053_21936208_132175 0380_n.jpg


this loom looks like the TD one but its the wrong way round?
and usually the reverse switch on the gearbox has a black and a black/white wire set, Ill have a look on mine in a bit for you