baxters big xe wanted thread

[General Baxter]

all for the corsa

1.6 16v engine complete (top and bottom ends, manifolds not important)
4-2-1 manifold,
free flow exhaust system with 2.5 or 3" inward rolled end,
sports cat,
244 cams,
mint f15 Cr gearbox (electric)
complete throttle body kit,
managment for bodies,
corsa PAS none aircon mount,

[shed-on-wheels]

i have a 4-2-1 from a c16xe without the re-circ holes ect

[General Baxter]

should really say x16xe, as the bends are slightly diff, also im not after the std manifold, janspeed one please

[shed-on-wheels]

ok bud no problem

[philip]

can supply newman fast road cams but new and from blanks not reprofiled £330

or i have some piper bp 270s...256duration from blanks, little use £220 pair posted

[7ova]

i have the engine mount, is it the front drivers side one?
how much of it do you need? the rubber four bolt mounting that
fits in to the chassis leg or the large bracket that bolts to the block
which the power steering pump allso bolts to??????

allso i have a gearbox not 100% which model it is but it is electric speedo
have you a part number, as this has one is stamped on the top?
stu

[General Baxter]

i have the engine mount, is it the front drivers side one?
how much of it do you need? the rubber four bolt mounting that
fits in to the chassis leg or the large bracket that bolts to the block
which the power steering pump allso bolts to??????


stu, its the large bit of metal that goes from the engine mount to the rubber block, i no longer use air con all removed, but to remove the pump you need a mount from a mini valver with out air con but with PAS

[7ova]

if you pm me your moble number i''l take a photo of what i have (over the weekend)
are you on about the large alumimium mount from the front
drivers side of the block
what about the box, its been cleaned and painted silver
but need to check part number????????