cooper4x4gsi+nova
03-10-11, 09:05 PM
Vauxhall Nova 2L 16V 1992 mk2 gsi replica on a K plate.
1.2 on the log book and will require changing to 2L
Recent pics http://s188.photobucket.com/albums/z250/coopergsi/Nova/
build pics http://photobucket.com/Nova-build
This has had a bare shell strip down and rebuild this year and had all corosion cut out and treated. It has had a full chassis strengthening kit fitted new rear 1/4panel repair sections and all inner arches have had the rust cut out and been repaired all rust and welds have been treated with loctite rust preventative prior to paint.
The car has been stich welded through out and all repairs fully seam welded.
The paint job is not concorse and has a few imperfections as it was not painted in a booth as the car was intended for track use not show and shine (built to use :thumb:) but this is still a tidy paint job.
The shell has a full safety devices rollcage welded onto platforms.
3point Sabelt seatbelt harnesses with GSI front seats
Steering wheel and boss
The car has fiberglass bonnet with Aerocatches and fiberglass boot
Rear polycarb windows (1/4 and boot lid) the front windows are stock glass on winders.
Full polybush kit
Rear disc conversion with new discs shoes pads and cable and a Bias control valve in car
Front brake disc's from a 2l 16v and calipers
new ball joints and track rod ends
GSI tie bars (Control arms)
gmax full suspension kit 40mm drop
Digi dash and transducer in a mk2 dash
With alloy wheels pro race 1 with good tyres
Plus 2l conversion shafts and mounts
£1200 Rather not break it too much this will make a good base for a project.
PEC steel rods ballanced set £350
Forged mahle (86P) xe pistons 86mm £35
kent cams ast 1612 £250
SBD vernier cam pulleys square tooth £100
4to1 exhaust manifold with heat wrap fitted £100
New alternator single V £25
New radiator and fan from a Tigra £25
Full 11lb wizards of NOS kit with bottle heater mini max controller and x4 NOS jets to suit 4 cylinder throttle bodys. £700
F16 gearbox stripped cleaned and re sealed £30
powerflow exhaust with scorpion back box £50
Located Cannock Staffs
Contact Rich 07813797957 or PM
1.2 on the log book and will require changing to 2L
Recent pics http://s188.photobucket.com/albums/z250/coopergsi/Nova/
build pics http://photobucket.com/Nova-build
This has had a bare shell strip down and rebuild this year and had all corosion cut out and treated. It has had a full chassis strengthening kit fitted new rear 1/4panel repair sections and all inner arches have had the rust cut out and been repaired all rust and welds have been treated with loctite rust preventative prior to paint.
The car has been stich welded through out and all repairs fully seam welded.
The paint job is not concorse and has a few imperfections as it was not painted in a booth as the car was intended for track use not show and shine (built to use :thumb:) but this is still a tidy paint job.
The shell has a full safety devices rollcage welded onto platforms.
3point Sabelt seatbelt harnesses with GSI front seats
Steering wheel and boss
The car has fiberglass bonnet with Aerocatches and fiberglass boot
Rear polycarb windows (1/4 and boot lid) the front windows are stock glass on winders.
Full polybush kit
Rear disc conversion with new discs shoes pads and cable and a Bias control valve in car
Front brake disc's from a 2l 16v and calipers
new ball joints and track rod ends
GSI tie bars (Control arms)
gmax full suspension kit 40mm drop
Digi dash and transducer in a mk2 dash
With alloy wheels pro race 1 with good tyres
Plus 2l conversion shafts and mounts
£1200 Rather not break it too much this will make a good base for a project.
PEC steel rods ballanced set £350
Forged mahle (86P) xe pistons 86mm £35
kent cams ast 1612 £250
SBD vernier cam pulleys square tooth £100
4to1 exhaust manifold with heat wrap fitted £100
New alternator single V £25
New radiator and fan from a Tigra £25
Full 11lb wizards of NOS kit with bottle heater mini max controller and x4 NOS jets to suit 4 cylinder throttle bodys. £700
F16 gearbox stripped cleaned and re sealed £30
powerflow exhaust with scorpion back box £50
Located Cannock Staffs
Contact Rich 07813797957 or PM