Ecu pin layout info

[turbo-boy]

Wanting to no is There any sites that I can get
Onto to find the ecu pin layout for a c16se nova
Gsi ?

[phazer]

This is what I documented when I removed the loom from my C14SE (ECU is the same on the dispack C14 as the C16SE).


A2 Green/Black Pin1 Crankshaft Position Sensor
A7 Green Pin B Vacuum Sensor
A8 Blue Pin C Throttle Position Sensor
A11 Brown
PinA Vacuum Sensor
Pin 1 Coolant Temp Pin
PinA Intake Temp Sensor

B1 Red
Pin C16 Starter
Pin 30
Pin 4 Fuel Pump Relay
Test Connector Pin F
B2 Blue/Red Pin 2 Distance Sensor
B3 Green/Red Pin 2 Crankshaft PositionSensor ECU
(ECUPin B10?)
B6 Brown/Red Pin 6 Fuel Pump Relay
B7 Brown/White Pin G Test Connector
B8 Black/White
Pin A Throttle Position
Pin C Vacuum Sensor
B10 Brown Pin A12 Ground
B11 Green Lambda Sensor

C1 Brown/Blue ECU Warning Light
C2 Green Tachometer
C4 Black
Pin 1 Distance Sensor
Pin 2 Fuel Pump Relay
C5 Green Pin C Idle Air Stepper
C6 Green/White Pin D Idle Air Stepper
C8 Blue/Green Pin B Idle Air Stepper
C9 Blue/Black Pin A Idle Air Stepper
C10 Brown/Red Injectors 1 & 2
C11 Brown/Red Injectors 3 & 4
C16 Red ECU Pin B1

D2 Brown
Pin B Octane Plug
Pin B Throttle Position
D3 Black/Brown Pin B Intake Temp Sensor
D8 Brown/Yellow Pin B Test Connector
D10 Black/Red To Ignition Module
D11 Brown/Blue Pin A Octane Plug

D1 |
C12 > Brown Ground
C13|

[turbo-boy]

thanks is the a,b,c,d the columm on the ecu?

[phazer]

It's the row identifier. The two plugs have rows of pins marked A and B on one and C and D on the other. If you look closely at the plugs you should see it and marker numbers for the pins.

[turbo-boy]

sweet im on the look out for a c14,c16 se ecu so i can strip it and soldier my omex loom onto the ecu side so i can make it plug and play so i dont have the cut any wires