Plow bumper fitting?

[scott.parker]

Right, I'm after pics and some advise on how your meant to fit them properly, would like to see pics of the bit/parts you have to fit them.

Also has any one got pics of the screw cap's/cover and any sizes etc?

All help would be very much appreciated, cheers.

Scott

[Southie]

They're held on by little clips like a u bend that have a hole either side and the a screw to nip them up, covers are covers and all the clips and screws and covers are rare as feck Scott. I bolted my old one underneath from where the old bottom lip valance use to fit.

Best making some brackets to fit tbh.

[MK999]

Fluoro orange cable ties in a criss cross pattern :)

[mayhem]

I have a set of both on spare, not selling it though.

I'll get some pics up tomorrow

[Calamity Josh]

Caps for the screws:
http://i1084.photobucket.com/albums/j404/CalamityJosh/album%202/IMG00194-20110830-1930.jpg
You can see a clip here, it had metal and plastic ones?
http://i1084.photobucket.com/albums/j404/CalamityJosh/album%202/IMG00201-20110830-1933.jpg
Heres a plastic clip, it screws on at the screw hole with the cap and bends round clipping into the bumper iron:
http://i1084.photobucket.com/albums/j404/CalamityJosh/album%202/IMG00199-20110830-1933.jpg
You can see here how it clips in:
http://i1084.photobucket.com/albums/j404/CalamityJosh/album%202/IMG00197-20110830-1932.jpg
Hope this helps?

[Mike]

Has anyone got any clearer pics of how these fit at all???

[Calamity Josh]

my ones show you all you need to know?

[Novasport]

http://img.photobucket.com/albums/v305/NovaSport/DSCF2079.jpg
http://img.photobucket.com/albums/v305/NovaSport/DSCF2080.jpg
http://img.photobucket.com/albums/v305/NovaSport/DSCF2081.jpg

[scott.parker]

I think what mikes asking is, could you posibly show a pic of the clip clearly and on it's own, and how it fits into the bumper bar etc?

And how they attach on the side/wing part also.
Cheers.

Scott

[scott.parker]

TBF Rich them diagrams with unclear text make less sense then the last set of pics! lol

[Calamity Josh]

i would mate, but i've sold the bottom half of the plough now and the clips so i now can't get any pictures to put up

[Novasport]

TBF Rich them diagrams with unclear text make less sense then the last set of pics! lol

Jeez, you want me to come and fit it for you? lol
Have you got a plough?

wait til you see the foglight ring fitting diagrams, they are clear as mud.

[scott.parker]

AH, bugger... So if anyone has any of the clips, can some one who has, please post a picture of them up, and maybe good detailed one's of how the fix to the bumper steal bar, and then how the plow fixes onto them etc??

Would be a huge help, as it looks like I'm going to have to make my own mount kit etc..

Scott

[scott.parker]

Jeez, you want me to come and fit it for you? lol
Have you got a plough?

Yes you can come fit it! lol

Yes mate, i do, but NO fixings or screw caps etc, just plough/plow with rubber joint strip and toe eye cover etc..

Scott

[Novasport]

wait til you see the foglight ring fitting diagrams, they are clear as mud.

http://img.photobucket.com/albums/v305/NovaSport/DSCF2082.jpg
http://img.photobucket.com/albums/v305/NovaSport/DSCF2083.jpg

[Mike]

Still totally baffled as to how these fit :S

[Novasport]

AH, bugger... So if anyone has any of the clips, can some one who has, please post a picture of them up, and maybe good detailed one's of how the fix to the bumper steal bar, and then how the plow fixes onto them etc??

Would be a huge help, as it looks like I'm going to have to make my own mount kit etc..

Scott

Will have a look in the parts dept(My loft). Got a couple of sets up there somewhere.

[scott.parker]

Royston has one on his SR, i wonder if he might be as so nice as to oblige with some details and pics we can understand a bit better?

Scott

[Novasport]

There are four clip on brackets that hook into the bumper iron in the centre then there are two screw on brackets that fit either end of the iron, the six screws behind the caps then screw into these brackets. There are two additional screws either side on the wing, I think the screws come from behind the wing and go into speed clips on the plough

[Mike]

There are four clip on brackets that hook into the bumper iron in the centre then there are two screw on brackets that fit either end of the iron, the six screws behind the caps then screw into these brackets. There are two additional screws either side on the wing, I think the screws come from behind the wing and go into speed clips on the plough

Ah right ok, I can kinda make sense of it better now :)

[scott.parker]

Humm, need some good pics still of actual clips etc on plows and car etc, and i don't like the idea of putting any bolts/screws through my nice wings!
So i will have to come up with a new way on that side of things..

But cheers for your info and help Rich, its all helpful.

Scott

[Southie]

I have four plough clips somewhere in my spare parts room Scott lol