4 door loon??? hmmm

[Dervy]

well yea i bought a 4 door loon, for some reason, not really sure what im going to do with it but here it is.

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture939.jpg
this is the worst bit on the car
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture940.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture941.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture942.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture943.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture944.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture945.jpg
bought a apex suspension kit of ebay for £20, so started fitting that today
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture946.jpg
then just for a laugh
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture947.jpg

[Spudly]

Lol where the hell did this come from, winter runner?



Ill be the big deeps dont catch at all do they, doooo it lol

[Dervy]

ebay :) no i dont think they will catch, believe it or not thats it lowered 60mm, but i only put them form for a laugh, iv got some 15`s to go on it.

[John]

sweet!

[Spudly]

Gay, leave the TSW's on it and get all four on:p

[mowgli]

ideal pickup donor.......??

[John]

or 4 door estate, the brothers burgo could have a matching pair then!

[Spudly]

or 4 door estate, the brothers burgo could have a matching pair then!




Thats a fecking sterling idea, Sam, do it:p

[Dervy]

lol thats a nice idea but i would need a nova hatch to chop the back end of

and luke would just think i was copying him

[Balley]

Okay the a Proper sized nova Van

[Dervy]

im just thinking of the resale, i dont want to do anything to crazy

[LEWI007]

Get a photo from the side with the big alloys on they look good imo.

[scott.parker]

Ace, i like the idea of it on 17's lol i reckon you should V8 it!

[Bubba]

omg omg omg omg omg omg omg big deeps :p have some rep sir

[Dervy]

did a little bit to ut today, just fitted the rear springs and shocks.

standard hight
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture948.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture949.jpg

then 60mm lower
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture952.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture953.jpg

and of corse i couldn`t help dropping it with no springs :)
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture950.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture951.jpg

i then sorted out the new front panel
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture954.jpg

[Spudly]

Put the big deeps ont you complete and utter ghey....:p

[Dervy]

lol no im putting my sexy wheels on this bloody thing

[Dervy]

well only remembered yesturday that iv got wellers on my talbot horizon, and they`ve been sitting there doing nothing for age`s, so i thought id go grab them and put them on the nova

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1004.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1005.jpg

they stick out a bit, but the car isn`t low enough for it to matter and it looks awesome

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1006.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1007.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1008.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1010.jpg

these are the wheels i bought for the car, proper bargin, borbet c`s i think with avon zv3 tyres, two of which are nearly brand new and the other two have plenty of meat on them. £36 on ebay, epic win i think, you couldn`t get one of these tyres new for that price. they will going on manda`s cesaro`s as her tyres are a bit ****.
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1011.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1012.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture1013.jpg

[Dervy]

had a little play on paint for a couple of hours :)

super low :)
http://i37.photobucket.com/albums/e69/amandayork_photo/lownova.jpg

[Southie]

Get those white deep 6 spokes back on IMO they look far far better ;)

Also paint is great if you can get hold of 160mm lowering springs lol

[Dervy]

im not putting the white ones on, they are worth more then the car is, no i reckon its only 120mm lol

[Southie]

lol worth more than the car, but they're the best wheels I've seen on a saloon 5 door so your right it's got to be worth £100 then lol

[Jack]

a saloon 5 door
Where is the extra door lol

[scott.parker]

I wouldn't normally say this..... but chop them springs, get the rears heated an in a vice! that ride hight has to be done! lol

[Dervy]

yea it would be good, but i cant have it that low as the front wheels stick out to far


although there is this option

http://i37.photobucket.com/albums/e69/amandayork_photo/pict0073d1.jpg

[scott.parker]

Yeah get some golf arches or them universal jap style one's off ebay etc, and just apply them with some silicone sealant type glue etc, that way you can remove later etc..

[Dervy]

i had a look on ebay i cant find any :(

[Southie]

Where is the extra door lol

If you don't know by now I'm not telling you, It was early this morning and yes I ballsed up :p

[Connor]

This is the best place to get those arches, loadsa people i know have bought them from him and i believe thats where matey above bought them from
http://retrorides.proboards.com/index.cgi?board=pfsw&action=display&thread=66146&page=1

[Dervy]

cheers connor, thats what i need :) might see if i can get some second hand one though to keep the cost down :)

[nova_niek]

i dont want to do anything to crazy

Oh yes you do.

I see a massive angle grinder and a 4 door loon coming together soon... and mate! LOL

[Dervy]

what did you have in mind? any idea`s

[Dervy]

there we go just had another little play on paint

http://i37.photobucket.com/albums/e69/amandayork_photo/Copyoflownova.jpg

[scott.parker]

pmsl lol g60 arch lips ftw

[Dervy]

had another little play today, i wanted to see how low the apex shocks would go, i turns out not very low at all

i took the spring out and just let the car down on to the bump stop
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture022-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture023-1.jpg
this is standard hight well on 60mm springs
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture024.jpg

its quite low but that is sitting on the bump stop so obviously it would need to sit atleast 20mm higher so its got some suspension travel

i then chopped the bump stop down but it didn`t make much more differance

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture025.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture026-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture027-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture028-1.jpg

then chucked on a fk coilover strut to see if that was better, which it was but its sitting on the bump stops so again would still need to be about 20mm higher then this, but it looks good

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture029-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture032.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture031-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture030-1.jpg

so afder mucking around with the struts, i tried the other wheels on it

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture033.jpg
found out these borbets arn`t 4x100, they are 4x 98 which is ****.

then just cus spudly keeps on it me about it, i put the 17s on it and dropped it till the arch was sitting on top of the tyre looks mega
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture036.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture037.jpg

then afder all the fun and games i removed the rubber spring mounting ring at the top of the strut to lower it about 10mm more.
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture038.jpg

[Iain]

Doesn't the rubber cup locate the spring properly on the top-mount? Assume you aren't keeping it like that?

[Dervy]

yea im going to reshape the top coil with a bit of heat, but i might not be using these struts anyway

[John]

Cut the strut tops off and re-weld them higher. (as per count vaux-a-lot's track car)

[Dervy]

yea i spose that is one of the cheaper options but how much higher can you make them?

[scott.parker]

Till they touch the bonnet under side, is cheep but not good for the resale, can you buy cheep short body coilovers..

[Dervy]

no short body coilovers are never really cheap :(

[scott.parker]

Humm, how about making a new plate/plates for the bolt on the hub carriers, so as to make the shock bolt in a lower position, would this work without fouling on anything?

Quick check, here's a pic of mine, i would say you could lower the bolt position around 15-20mm MAX before there's clearance issues on the CV boot etc.. :thumb:

http://img18.imageshack.us/img18/6272/dscf3243k.jpg

Scott

[Dervy]

i have thought of doing this before, problem is i would have to weld brakets onto the struts which is a bit doggy because obviously you shouldn`t really get the struts hot. its possable though. im going to do a bit of reserch

[scott.parker]

Do it a bit at a time, and cool with a wet rag maybe?

I think it's worth trying with some cheap shocks just to see.

Scott

[Southie]

Scott don't you have issues with driveshafts all the time, maybe down to the coilover setup you've made.

[Dervy]

im glad you had a pic like that, i couldn`t find any. it looks doable, i think doing that and raising the strut top mount would get me about 1.5" - 2" which is more then enough i think. i think im going to have a play tomorrow and see how it looks :)

[scott.parker]

lol what? No, i killed a shaft, but then Ive had that shaft on the near side from my old car 2004? and the CV's so was bout time something went, just need new CV's now, just not enough cash to replace them.

[bai1ey]

have you seen them coilover sleeves that you weld onto your shock.
You take your lower spring cup off and weld these sleeves on. you could always see
about removing your lower spring seat and reweld it lower down.
(runs off to find a pic)

[bai1ey]

http://i269.photobucket.com/albums/jj72/bailey_51088/images_PC070006.jpg

Please note that this kit requires the removal of the original spring pan and the kit welding to the strut - it is not a bolt-on coversion.

[scott.parker]

lol that might work essayer, better...

[bai1ey]

lol i thought that

[Dervy]

yea iv got some of them for my astra. but its not a problem with the springs on the nova, its the struts are to long, with the length of the coilovers that iv got you can only lower the car about 80mm and still have a bit of suspension travel, even if you remove the bump stops, if you go any lower then that then the struts bottom out. im hoping to go to around 120mm lower then standard but still have good suspension travel.

[Dervy]

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture032.jpg

[Dervy]

the orange bit is the bump stop

[bai1ey]

arhhh i see there is no other way you should just sell the car to me for £100 and a mars bar plus a pack of pundland marsh mellows lool.

the idea about putting a band the the top mounts is prob the best way then.

[bai1ey]

i saw dude wasnt really thinking when i said about them sorry

[Dervy]

lol its alright mate most people dont have this problem, they just buy nice expensive sort shocks, but i have no money so im thinking of the cheap ways to get it lower

[bai1ey]

lol i am the same but would like a project. but dont really want to spend the
money buying one but i am gonna be off work for a while so i need summut.

i really cant think of a easy way to get it lower on a budget.

[BRoadGhost]

You can get the front lower than that and still have better travel if you do it properly.

[Dervy]

yea i wasn`t even planning on doing anything to this nova apart from clean it up and sell it on but you know how these things are, before you know it you start buying things and it turns into a project.

[Dervy]

define doing it properly?, cus if you mean buy short shocks, then we`ve already covered that, i have no money

[karisma]

Raising the turrets is the easiest way, its how most of the scene boys get low and still have suspension travel. There are some plates you can buy to lower the rear 80mm on standard suspension. The plate bolts onto the original stub axle bolts and then there is 4 bolts holes higher up to bolt on the stub axle. ill see if I can dig out some info on them. not sure if they're produced for any of the vauxhall range. if you know any engineers then they'll be easy to make.

[Dervy]

yea i know what you mean my brother was on about doing that on is blue saloon, but im not worried about then back end cus thats easy compered to the front.

[bai1ey]

10mm plate a drill, a tape and alot of time should see the plates your on about made

[Dervy]

yea but its cheap cus i haven`t really got to buy anthing, iv already got nice think plate i could use, so thats not a problem

[Southie]

Sorry Scott I remembered incorrectly, I drive a Ford now so a little bit weaker lol

[scott.parker]

Humm, could you use the plate idea, but not weld them on, maybe, drill a new hole between the two on the shock, then as long as the distance is right you might get a new hole in the metal above the top hole on the shock, meaning you could bolt it to it with the bolt holes, no welding..

hope that makes sense?

Scott

[bai1ey]

i think i understand scott you on about the front insted of moving the hub mount use a plate to lower it like on the rear ?

[scott.parker]

i think i understand scott you on about the front insted of moving the hub mount use a plate to lower it like on the rear ?

Quick mock on paint lol
Black is oem, red lines are plate/new holes..

http://img202.imageshack.us/img202/9513/shockrelocate.jpg

[Dervy]

lol i just done the exact same thins scott
http://i37.photobucket.com/albums/e69/amandayork_photo/strut.jpg

[Dervy]

im going to have a play tomorrow

[bai1ey]

would a local engianeer not turn a new set of top mount with a higher top bolt location if that makes sense

[Dervy]

yea but again its the money problem

[bai1ey]

very quick paint job but i suppose this will do the same job as raising strut top.

http://i269.photobucket.com/albums/jj72/bailey_51088/Untitled.jpg

[Dervy]

yep thats what im thinking, iv not seen anybody else do it, so it will be a first, which i like :)

[bai1ey]

koolieo good look i may just make this the first ever thread i subscribe to

[Dervy]

cool cheers mate, i`ll have aplay tomorrow, get some detailed photo`s and start mocking it up :)

[karisma]

Fk make top mount cups that are deeper to achieve what you want. Mark w is selling a set on corsasport.

[bai1ey]

top mount cups hub mount bolt and strut top mod any you will have all the travel you need lol

[Dervy]

Fk make top mount cups that are deeper to achieve what you want. Mark w is selling a set on corsasport.

i`ll have to go have a look, i need the spring mounting rings aswell, the ones that go on the threaded bit, anbody know where i can get some

[Dervy]

had a bit of play, i got some more weller wheels, anybody think they are to big lol

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture040.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture041.jpg
they are only 15x9" lol

bloke who had them before, had these plates made up and drilled 4x108mm holes for his escort

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture042-2.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture044-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture043.jpg

i drilled the new holes to fit the nova

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture045.jpg

im going to have the plates machined down a bit though because thay are 20mm thick, which is to much for the bolts to go through.
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture046.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture048.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture050.jpg

now on to the coilovers again, the idea i had to modify the mounting brackets has not really gone to plan

standard position
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture052.jpg

this is as low as it can go, which is only about 8mm lower :(, i think im still going to do it

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture055.jpg

[Dervy]

this is where the new bottom hole will be
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture056.jpg
and the top will be like this, with a bit of plate added to the top
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture059.jpg

[pie]

nice n wide :)

[gary_126]

instantly thought of the fk top spring cups, but been mentioned already. I would look into a way of getting the piston of the shock further through the turret.

The rear is fairly easy, 60 or 80 springs and raise the stub axels.

[bai1ey]

are you still gonna put a band in the turret dervy aswell as the cups? and the bottom plate mod?

[Dervy]

yea bailey i think i am but i need to see how much travel iv gained with the fk raised top cups and the modded bottom mounting bracket :), it doesn`t need to go as low with the 15" on aswell but its still guna be bloody low :)

[Dervy]

ok had a little play again today and im a bit sad as iv decided that the 15" wellers stick out to far. i can get jdm style arch extensions that will cover them but i think its just going to look a bit silly :(

even though they do look f`ing sweet from the side

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture069-3.jpg

thsi is how far they stick out, its 80mm from the lip of the arch

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture062.jpg

from the front

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture066-1.jpg

and what it would look like with the 95mm arch extensions

http://i37.photobucket.com/albums/e69/amandayork_photo/CopyofPicture066.jpg

just a couple of pics from the back

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture073.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture071-2.jpg

[gary_126]

Im so glad you have come to this decision!! Those wheels are fine, (look a bit land rover ish) but in that width/offset just look crap on a nova. I quite like the original alloys you bought (could you not get wobbly bolts? its only 2mm pcd difference.

[Dervy]

what the borbets? yea i do like the way they look on it, its a bit of a pain having to use wobbly bolts, means i would need to buy a set.

[LEWI007]

Put arch extensions on and keep those wheels mate it will look EPIC.

Ive got a photo of a saloon with widearch extensions and deep dish wheels i can upload if you want a look

[bai1ey]

dervy i am also happy you arnt gonna use the second set of wellers i think a set of deep'ish wheels that the oem arch will strecth over

[Dervy]

Put arch extensions on and keep those wheels mate it will look EPIC.

Ive got a photo of a saloon with widearch extensions and deep dish wheels i can upload if you want a look

is it the blue rat look one?

[scott.parker]

Sam them wheels look mental, and would probably make it handle like ****! lol

Did you sell Amada's SR steels? if not you could band them?? then get the arch extension too.. I'm sure you and Luke could have a go at banding them your self to keep cost's down?

Scott

[Dervy]

no we sold them to dan, they are on his diesel. im guna stick with the 13" wellers for now

[bai1ey]

the first set of wellers looked well on it mate

[Dervy]

one step forward two steps back, but never mind

came up with another idea for getting more travel from the shocks, i made i new top mount that gets rid of the big rubber bit.

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture074.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture075.jpg

as you can see it gives about 30mm more travel.

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture076.jpg

i then set about getting the new lock rings on, which ment i had to remove the top cap which of corse was seized on
i had to slice it to loosen it of
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture079-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture078.jpg

i then found out that the new lock rings that i bought dont fit :( they look to be about 2mm smaller then my 52mm coilovers

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture-2.jpg

[bai1ey]

owt new happerning dude

[Dervy]

no not yet, iv been working on my astra for its mot, i should have an update on the nova next week

[Dervy]

well afder spending last week sorting the astra out for its mot, iv been able to do a bit more to the nova today.

being skint and not being able to find the right size spring mount lock rings for my coilover, i made my own
started with this big lump of 66 nylon
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture-3.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture020-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture029-2.jpg

this is the coilover all built up with mk3 astra top mount
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture030-2.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture032-2.jpg

i had to make the hole in the strut top mount bigger to fit the astra strut top
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture031-2.jpg

this is how its sitting at the minute
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture036-1.jpg

it looks like its got around 3 and a half inch`s of travel which i think is plenty
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture035.jpg

i couldn`t be arsed to do the other side but i did sort out the hole in the backbox, i fitted the powerflow silencer that used to be on the astra.
it sounds great, i did do a video but the sound quality is crap on my camera, so theres not much point putting it on here.
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture037-1.jpg

[pie]

looking good buddy

[mexicoredmk2]

big deeps defo i have a set super rare now and look awesome.......

[gary_126]

looking good, tho im not keen on the nylon spring platforms :S

[Dervy]

cheers gary, no neather am i but i can`t find any proper one`s anywhere apart from fk website, but they want over £80 for a set of four :(

[gary_126]

oooft thats stupid money!! What thread size/pitch and seat diamater are they? (i had a crazy saga getting ones for my mk4 astra's bilsteins, after loads of phonecalls, emailing them photos, exact dimensions, and about 9 months i ended up going to there hq in england on the way to billing, and got it sorted within 5 mins!!)

[Dervy]

they are fk coilovers which are 54mm x 1.5 which is not a common size most others coilovers are 57mm.

[karisma]

Do those astra top mounts make much difference? To overall height?

[Dervy]

yea its giving it about 30mm extra drop or shock travel, so its well worth doing.

[Dervy]

update coming later today, just to get he word out, im going to be selling the 4 door soon :(

[Dervy]

right here it is, finally got some more coilovers, so set about fitting them today.

the new coilovers built up with the mk3 astra strut tops.

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture053.jpg

i would love to have it this low but the arch sits on top of the tyre

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture056-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture058.jpg

this is how it sitting now, still pretty low

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture059-1.jpg

this will be going up for sale soon so if your interested let me know, it won`t have they coilovers on it but it will have a full 60mm apex suppension kit on it, the weller wheels won`t be included eather, will probs be on standard wheels but im keeping my eye out for some cheap alloys to go on it.

[binty2k8]

Does puttin the astra mk3 top mounts make them any lower just got.coilovers for.my.loon got them fully dwn on 13's with 165/55/13 tyres but i want it about another 5-10mm but i gt told.takin helper springs out will drop.it bout.15mm

[Dervy]

yea it makes it about 25-30mm lower

[Dervy]

started on the welding today

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture060.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture062-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture061.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture063.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture064.jpg

that will do for today, it will get a skim of filler tomorrow

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture068.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture071-3.jpg

[Dervy]

update on mot work, it now has an mot, but i had to replace the front panel

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture072-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture073-1.jpg

got it done at 14:45, it was booked in for 15:00 for its retest lol, cutting it close :)

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture078-1.jpg

i put manda`s white cesaro`s on for the mot and it looks very sexy :)

http://i37.photobucket.com/albums/e69/amandayork_photo/Picture075-1.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture079-2.jpg
http://i37.photobucket.com/albums/e69/amandayork_photo/Picture077-1.jpg

[Gibbo]

looking very nice.

[John]

nice!

[Damo]

looks nice that dervy coming on mate loons are growing on me.

[binty2k8]

keep the cesaro's on that like and i think i'll have to get sum astra top mounts then

[pie]

looking goos buddy

cesaros suit so well :)

[Mazz]

Cool

Kinda looks like a mini-retro-Vectra ST!

[Dervy]

Cool

Kinda looks like a mini-retro-Vectra ST!

yea just bung a v6 in it and some recaro`s, nova super touring :) i like the sound of that :)

[Mazz]

I'll bet you can't....

:p