PDA

View Full Version : Rebuilt c20let with Arp studs, rod bolts etc, Phase 2 ECU and 3.5 FPR £750



Will F
25-08-11, 01:00 PM
This is/was the engine fitted to my saloon - it was reebuilt a few years back and has bearly done any miles since!

Will come with turbo (no smoke at all!) an EDS P2 ECU, 3.5 bar reg, loom etc etc

Head and bottom end was fully rebuilt with ARP head studs and rod bolts, new lifters (GM), seals and seats etc. 86.5mm Mahle pistons.

Basically everything except an intercooler.

Reason I am selling is that it started to make a REALLY small rattle at about 3k - oil pressure was perfect etc and there was no swarf etc in the oil. I had a spare LET which I fitted and was going to fit new shells to this one - but need the cash now..

£750 no offers

jasonpoole098
25-08-11, 01:54 PM
if u break it pal i will take the loom ecu an turbo

Will F
25-08-11, 02:19 PM
Would rather sell as one tbh PMs replied

Will F
25-08-11, 04:21 PM
Sold!!