PDA

View Full Version : Marsi's '87 MK1 "Cup"



Marsi
21-08-11, 12:31 AM
Hello to everyone,

me being registered here for about 4 years now just want to present you
my new project.
After already having a Corsa A (MK2) and a Corsa A Sedan (MK1) I didn't own a Corsa
for about 2 years now.
2 weeks ago I bought a Corsa (MK1) that was up for a really good offer.
So that is, where we go:

http://forum.corsa-a.de/download/file.php?id=5701&mode=view
http://forum.corsa-a.de/download/file.php?id=5702&mode=view
http://forum.corsa-a.de/download/file.php?id=5704&mode=view

This Corsa was build in 1987 having an E12GV-engine in it.
Being a "Cup"-edition, this car misses nearly any extras, that were available at
the late eighties. Just have a look at the missing passenger rear mirror.

So far, the Corsa was of the road since 1998 now, what hold him in a really good
condition. Only the driver side rear arch needs a replacement, anywhere else
the brown pest is missing.
Things I want to change are only a few:
- adding some clear front indicators
- adding a new suspension that lowers the car a little
- mounting some Mattig SSF wheels in 13''
- adding a new exhaust with more design and sound ;)

Later on, the E12GV-engine will make place for a 13S-engine joining some carburetors.

Last week I mounted an Irmscher body-kit, but I think this will be left for another
project. I unmounted that afterwards:

http://forum.corsa-a.de/download/file.php?id=5708&mode=view
http://forum.corsa-a.de/download/file.php?id=5709&mode=view

Hope you like my Corsa even though it's not a Nova.
I promise to report every progress.

Regards, Marsi

Edd
21-08-11, 02:34 AM
Looks a nice car to start a project from

I like the Irmscher stuff :) if you don't like it I'm sure there's a few people that would buy the parts from you :d

Keep us updated as you build it

LEWI007
21-08-11, 10:12 AM
Looks like a good start, its clean.

Is that red car in the background a Kadett GSi ?

Or would it be called an Astra over there ?

christurboo
21-08-11, 12:05 PM
wow....i like the irmisher kit should leave it on very rare over here. keep cracking on with it mate.

Marsi
21-08-11, 01:24 PM
Hi,

yes Lewi, you're right, that is what we call an Astra GSI. There are at least 3 of them at our garage. They are getting rare here in Germany also.

I like that Irmscher kit as well. But as I said, this will be build on another Corsa I am planing to rebuild.
To sell this kit would be no alternative to me. It took me a long time to complete this set due to it getting rare in Germany as well.

EDIT:

This afternoon I got the wheels I was looking for. I suppose my fellow tricked on me, because that seem not to be Mattig-SSF wheels,
but I think, that doesn't matter so far:

http://forum.corsa-a.de/download/file.php?id=5744&mode=view

Now the car needs to be lowered a lot, I think 80 mm at the front and 60 mm at the rear will do a good job for it.

christurboo
21-08-11, 07:48 PM
Now the car needs to be lowered a lot, I think 80 mm at the front and 60 mm at the rear will do a good job for it.


120mm all around, make it scrapee!!

Marsi
26-08-11, 07:36 PM
Some updates of the last few days:

- lowered the car with a FK-suspension, but needs to be lowered a bit more at the front
- installed white front indicators (brand new ones)
- installed british tail light on the left
- installed a nice exhaust
- got the car cleaned again and
- got the hood polished

Further on I got a frame for VDO-gauges that fits the radio-frame. The gauges itselves
will follow next week.

http://forum.corsa-a.de/download/file.php?id=5751&mode=view
http://forum.corsa-a.de/download/file.php?id=5752&mode=view

Marsi

NOV4_SPORT
26-08-11, 07:51 PM
Looking pretty tidy mate, i also like the irmscher kit for the nova very nice.

iain

christurboo
26-08-11, 11:44 PM
looks like its cleaned up well mate

LEWI007
27-08-11, 12:51 AM
Looks good man, one thing i noticed with Opel Corsa A and Vauxhall Nova.

If you look on the tailgate the rear window wiper is on the left hand side on the Opel, and the right hand side on the Vauxhall, i think it must be to go with the driver position, rhd and lhd.

Edd
27-08-11, 02:13 AM
That's cleaned up well

Wheels look wide lol what's the offset ?

Marsi
28-08-11, 09:54 AM
The offset ist 25, the wheel itself 7jx13.

Pistol Pete
28-08-11, 08:05 PM
Looks good. Lower it and it will look ace. Might catch on those wheels though!