steelies and r888

[24sevenslacker]

anybody know where i can get a pair of steels that will fit over cav turbo front brakes and take some toyo r888's? or if thats even possible lol

[Angus Closier]

Will 16inch steels fit over the turbo brakes?? As for 888's you could band the steels a bit if you want them a sensible width? Or you could just get some cheap alloys?

[Mieran]

15" steels from a mk4 astra are 6J wide so should be ok for 195/50/15 R888s, theyre 4 stud too and go over 284 brakes

[Nobby]

15" steels from a mk4 astra are 6J wide so should be ok for 195/50/15 R888s, theyre 4 stud too and go over 284 brakes
no they wont

[Andy_L]

16 inch steelies from a Vectra?

[Jedro]

16 inch steelies from a Vectra?

i think most are 5 stud aren't they? how about Renault scenic, 4 stud, 16", 4x100....

[Bubba]

i think most are 5 stud aren't they? how about Renault scenic, 4 stud, 16", 4x100....

careful on the centre bore size. civic fit vaux but the centre bore is about 1mm smaller and i had to have it axed off the hub

[Jedro]

careful on the centre bore size. civic fit vaux but the centre bore is about 1mm smaller and i had to have it axed off the hub



hmmm, come to think about it, i once had some "COOL AS FOOK MULTI FIT ALLOYS" (halfords finest) and they came off a Vaux and onto an old Renault, i needed spigot rings. much more than a mm difference iirc

[Mieran]

no they wont
I've got 15" steels over 280 brakes right now and there is plenty of room for another 4mm

[Jedro]

vw g60's are the way forward