PDA

View Full Version : What else can go wrong!



epo
06-07-03, 04:21 PM
started removin the vinal and the bump strips on the drivers side its now done apart from the fact that at the bottom corrner of the door is fillered and sparyed(by the previous owner and i didnt notice) so i gotta rub part of it down now and spray it
also on the door when i removerd the bump strip there is a line where it hasnt bin sprayed propaly and same on the rear pannel above the fuel cap so im now gunna fit another bump strip to cover it
dreadin doing the other side now!!!! :evil:

greg00uk
06-07-03, 04:44 PM
should have got it done at a body shop, my SRi had been resprayed before i got it, and they had just masked off the black stuff.

It only cost me ?200 to get it all removed and the paintwork done! bargin. 8)

epo
06-07-03, 05:01 PM
wish i had done now but ive started so i might as well finish

DUNOVA.
06-07-03, 06:10 PM
Ive almost done mine I found alot of rust under the vinyl:(

greg00uk
06-07-03, 06:30 PM
yep, its well worth it when its all finnished.

its easy if u happen to have a top notch nova in the first place.

these things are sent to try us :lol:

epo
06-07-03, 07:16 PM
am all sorted now me old boys a fcukin star as for the dodgy line were gonna rub it down and spray it i got a couple of tiny bits of rust but they aint 2 bad!

frog_southampton
06-07-03, 11:08 PM
i removed all vinal from drivers side between the windows

passenger side wont budge, looks well odd!

Euan
06-07-03, 11:52 PM
i've got new doors and front wings without vinyl on them anyway so i only gotta worry bout the quarter panels!