PDA

View Full Version : Diamond black Nova GSi C20LET



Lee H
06-08-11, 10:09 PM
Hi all,

A lot of you will know the car and how well it has been looked after and pampered by me. I have decided to try and sell it complete rather than break it first as it is a shame to split the car.

I bought this car in Jersey as a standard GSi in 2001 and over the course of the last 10 years have spent over £20k on the car, it has wanted for nothing. Due to it being from Jersey it has low mileage and was rust free as the roads are not salted over there. The car is showing 74k on the clocks now and has only been used through 2 winters in the UK so has never had any welding underneath and is still on its original rear wheelarches.

The car had a full bare shell respray in 2007 and during this restoration had new front inner wings and turrets as i'm a perfectionist and wasn't happy with the stitch welding done originally. It has the full Harry Hockley strenghtening kit as well. I also had a new door, new front wings and new bumpers during the respray (all panels are genuine GM parts). The doors have been delocked and the bumper trimmed slightly for the intercooler but the outside is mainly standard GSi.

The underneath has been stripped, inspected for rust and reprotected by the bodyshop. All the front splashguards are original and have never been patched.

The car has a Clifford Concept 600 CAT 1 alarm/immobiliser with 2 fobs etc.

Engine

C20LET block rebored to 86.5mm
Accralite low compression pistons
Cometic 1.9mm headgasket
ARP rod bolts and headstuds
Z20LET oil pump and modified pickup pipe
Coscast head
Frontera intercooler
Samco boost hoses
Bailey dump valve
Bailey header tank
Ramair induction kit
Wideband lambda
JP exhaust system

Gearbox/Transmission

F28 with Quaife LSD
Rose jointed gearlinkage
Equal length driveshafts
Big block hubs
Billet flywheel
Helix 6 paddle clutch

Suspension/Brakes

Gaz coilovers front and rear
Eccentric top mounts
Lowered tie bars with rose joints
Quaife quick rack
Wilwood Midilite front calipers with 280mm disks
Rear disk conversion
Braided hoses
Fearless front strutbrace

Wheels

Set of 5 immaculate never refurbished Speedline Allesio 2's with brand new Toyo T1R's 195/40 R16

Exterior

Clear side repeaters and rear lights
GM mudflaps
GM headlamp protectors
New door pillar vinyl and door stickers
Jazz rear wiper arm

Interior

Stripped and painted inside
Seat rails welded in
Corbeau Sprint side mounted bucket seats
Luke 3" 4 point harnesses
Fabricage 6 point bolt in rollcage powdercoated black
Flocked dash binnacle
Electric sunroof conversion

Car currently has no MOT as I don't use it but will put a full 12 month ticket on it.

Engine has done approximately 2k miles since it was rebuilt. Car is all log booked up as a 2.0 etc.

http://farm4.static.flickr.com/3527/3998665430_8b8e65de28.jpg

http://farm3.static.flickr.com/2428/3998679480_7bf2cf4e0f.jpg

http://farm3.static.flickr.com/2527/3997918025_061578af48.jpg

http://farm3.static.flickr.com/2572/3998665218_11f10b1f5c.jpg

http://farm3.static.flickr.com/2433/3997903357_dca3a7b379.jpg


I'm looking for £7000. Please no silly offers or comments on the price, i'm not desperate to sell and will break if I have to.

Please contact me on 07834 856011 or lee_haslam@hotmail.co.uk

nova_nath
15-08-11, 03:25 PM
intrested in swaping for a vectra 05 plate 3.0 v6 cdti with big spec. its the one you saw when i picked up the digi dash of you a few years ago

Lee H
26-11-11, 10:42 AM
Bump.

May start breaking it over winter.

L33 LEG
26-11-11, 11:07 AM
As said in a previous pm, if you come to break this let me know what you want for the shell Lee :) Good luck before then though with the sale.

blue_peg_16v
27-11-11, 12:31 PM
I'd also be interested in the shell if you do break it mate as well as a few other bits

MattBrown
27-11-11, 01:24 PM
Ill have the gearbox, shafts and brakes if you do break.

Cash waiting.....

Ps, fearless brace too:)

kingwick
27-11-11, 09:22 PM
how much for engine box and loom if breaking please ?

Lee H
27-11-11, 09:33 PM
.

Mike
27-11-11, 09:36 PM
Lee, if (when!) you break it to pieces, Ill take the Midilites & disc's.

RJM25R
29-11-11, 08:54 PM
Hi Lee, long time no see!

Shame if you don't sell it complete. It's good value considering how much you have spent over the years, and it's so solid after all the work you've had done.

Any potential buyers need to note that this is a show quality car and needs NO MONEY spending on it.

Glws mate!

Lee H
09-02-12, 08:57 PM
Looks like its being broken now unfortunately as engine has sold.

Tommy_nova
09-02-12, 10:18 PM
if you do split il have afew bits buddy

Front bumper
drivers door
gsi spoiler
side skirts
interior ect

pm me :)

Tommy

shaun larnder
10-02-12, 10:00 PM
Pm sent.

Rickyb
10-02-12, 10:56 PM
i have also pm'd you

jaygsi
11-02-12, 01:12 AM
I know its nice shame to break. I got a impreza i'd swap for. Or i'd buy shell with everything - alloys, engine.

Jeff16v
11-02-12, 09:08 PM
Interested in exhaust here fella

Rick Draper
12-02-12, 07:46 PM
Whats the best price you will do me Lee? Is Weston Union money transfer ok? I am working in Nigeria at the moment, I will arrange shipping if you can get it to Hull port for me?

Lee H
12-02-12, 08:03 PM
Whats the best price you will do me Lee? Is Weston Union money transfer ok? I am working in Nigeria at the moment, I will arrange shipping if you can get it to Hull port for me?

I'd rather Western Union tbh, had far too many people offering cash like its an incentive to knock £1k off the asking price. :roll:

Still no deposit received for engine so breaking is on hold until that sells or the whole car sells.

E5XTC
16-02-12, 01:23 PM
I'd rather Western Union tbh, had far too many people offering cash like its an incentive to knock £1k off the asking price. :roll:

Still no deposit received for engine so breaking is on hold until that sells or the whole car sells.

Lee,

Is she still for sale ???

Lee H
16-02-12, 01:38 PM
Lee,

Is she still for sale ???

Yes

Rick Draper
17-02-12, 01:07 AM
Whats the best price for cash here and now?

Mike wants to know.