How do i wire

[Vausey]

the water temp sensor up on my c20xe as it isnt reading anything?

[brainsnova]

The wire goes from the sensor to the clocks. You can test the gauge by unplugging and earthing the wire at the sensor. The guage should read max. If it does the sensor is faulty.

[joff-turbo-nova]

There should be a blue wire with a spade connector at the end located on the XE loom near the Coolant Temp Sensor plug.

The other end of this blue wire should be somewhere on the multiplugs next to the main ECU plug . You need to run a wire from this blue wire up to the blue wire on the dash plug and everything should be OK

Joff

[Vausey]

thanks guys will give this a shot .