Corsa Suspension = noticeably higher than Nova?

[MK1_Ben]

The camber on the car was fine when it was running a standard Nova setup, then on my Bilsteins and 100mm springs it had slight negative camber.

I recently purchased Corsa suspension from a breakers for my MOT, fitted it and the front has slight positive camber... is Corsa stuff high enough to cause this?

http://img88.imageshack.us/img88/1646/photo28072011194508.jpg

[Mike]

Corsa stuff it higher poundage & rebound rate etc so will make a Nova sit higher. Nova stuff (rears more so) make Corsa's properly low!

Example below 30mm Nova springs on Corsa rear:

http://i80.photobucket.com/albums/j181/mikenova/lowcorsa.jpg

[MK1_Ben]

So it would explain why I have the positive camber?

[Mike]

So it would explain why I have the positive camber?

Have you ever noticed when you remove an engine from a car it gains masses of positive camber because there no front end weight so it sits up in the air. Well think along similiar lines but the same weight ~ up in the air.

[MK1_Ben]

Thanks for confirming :)

Had a slight concern I'd damaged something as the car is usually incredibly low (over 100mm more than standard). But seeing as that's the case it's fine.

+rep