PDA

View Full Version : nova gsi engine transplant



waynemears
10-07-11, 05:14 PM
hi i have just put a nova gsi engine in a 1.2i shell and i have got the fuel pump working but have no spark at the plugs but power to the coil please help anyone

mowgli
10-07-11, 05:18 PM
i'm guessing that you didn't use the correct power feed. you need the one off the ign switch that is always on when the ignition switch is on & also when cranking over. there is only one position of the switch that does this, the rest turn off during cranking.

Adam
10-07-11, 05:20 PM
Have you got the pump running properly off the ecu's fuel pump relay?

waynemears
13-07-11, 04:41 PM
that worked thanks now all sparking not sure i have the leads on the cap corectly can any one tell me how they go thanks

mowgli
13-07-11, 05:01 PM
http://i134.photobucket.com/albums/q119/mowglinova/007-1.jpg?t=1310572777


IN LAYMENS TERMS, LOOKING FROM THE DIZZY END......


...............................1
......................3
................................2
.........................4

IF ITS A LATER DISPAK, THEN I DUNNO

waynemears
13-07-11, 07:12 PM
cheers mate you have been a big help dont suppose you could tell me which fuel line goes where too

mowgli
13-07-11, 07:28 PM
feed pipe to the offside & return to the nearside end of the rail. it will only work one way round, so you'll know its wrong if the pump is coughing

waynemears
13-07-11, 07:32 PM
there ate 2 places to put pipes on the bottom of the inlet do they both go there 1 is longer than the other thanks

mowgli
13-07-11, 07:34 PM
yes

waynemears
13-07-11, 08:03 PM
but which one one where mate as 1 goes to the rail and 1 to the regulator

Riggy
13-07-11, 10:00 PM
feed to the rail , return from the regulator :thumb: