View Full Version : temp guage
gavmc18
03-07-03, 09:58 PM
something has happened to my gsi the temp is ok on the dash but it aint reading anything what should i check
shud be a blue wire somewhere, iv forgot where it is on the gsi, got a spade connector on the end, its gonna be thats come loose
mikeoxford
04-07-03, 12:29 AM
the spade connector and blue wire is on carbed novas on the inlet as far as im aware
on the gsi / gte (i have a gsi B+ head)
the water temp sensor sits below the dizzy on the right hand side of the head
gavmc18
04-07-03, 06:12 PM
i have both where does the blue wire connect to
Aragorn
06-07-03, 12:37 AM
the sensor on the head is for the ECU
teh sensor for the dash is mounted on a small box on the underside of the inlet manifold - follow the heater matrix inlet and you should see it
blue wire just clips ontop of the little nipple thing
gavmc18
06-07-03, 05:21 PM
all sored thanks for all the help
mikeoxford
07-07-03, 12:11 AM
what was it then?
gavmc18
07-07-03, 06:16 PM
the blue wire needed to be connected at the back of the inlet manifold
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.