c20let corsa help please

[rick-c20let]

hi there realey need help on my corsa it has got a c20let phase 2 wiyh a z20let headgasket and it just keeps getting very hot round bout 98-100 + degrease the engine has been fully rebuilt new headgasket i have taken the thermostat out but it still get hot i even blanked the matrix off to see if it was that and it wasent have had it pressure bleed up and it holds vaccum so there is no leaks i am in 2 minds now wheather to take the head off and have it pressure tested to be on the safe sid can any 1 please give me some ideas as i dont want to take the head off thanks rick :(

[General Baxter]

what rad/fan set up you got?

is it getting hot, when giving it some, or just ticking over ?

[comptoncj]

Has the water pump been replaced? I would check that, Did you have the head pressure checked when you replaced the head gasket?

Edit.

Just thinking about it, a few weeks ago i had to put an extra cooling fan on a let mk3 astra because when stood still the radiator didnt have enough cooling effect with just one fan.

[rick-c20let]

got standard corsa rad 2 motorbike fans and yes the water pump was replaced n the head was not pressure tested

[geonerstiem]

delete

[Damo]

As said by rick i rebuilt the engine for him i fitted new z20let steel gasket which i drilled the rivits out of i replaced the waterpump headbolts all crank bearings and gaskets but since we refitted it it overheats and starts bubbling out of the header tank the thermostat has being removed too just to eliminate it has anyone else had similar issues or anyone local who could come have a nosey see if they no any different like rich (bluepeg16v) lol.

Damo.