PDA

View Full Version : Jonlems Vauxhall + other parts clear out



Jonlem
09-06-11, 11:38 PM
I've got a shed load of stuff I need to either skip or sell. I've sorted through what I atleast feel is useful to others and I'll bring it all to PV for people to collect.

No pics I'm afraid as I haven't got time but everything works and is either in good or reasonable condition.

Here goes :

Vauxhall

ATE 16v discs and calipers ( one caliper is new ) £30
C20XE GM head, coilpack engine, complete with cams, had recent skim £60
C20XE bottom end, complete inc oil pump, no sump £50
C20XE cam sensor £10
C20XE ecu ( DIS ) £20
C20XE coilpack, new £25
C20XE HT leads, coilpack type £10
C20XE inlet with tb inc tps £20
C20XE alloy sump £10
C20XE 4 branch manifold, standard item, requires flange system end. £10
C20XE ecotec pipe with bolt on flange for tb. £10
C20XE intake pipe with air filter (slightly crushed) and IAT sensor £10
C20XE block breather tube and dipstick £5
C20LET turbo oil feed pipe £10
C20XE/LET Cam cover x2 £15 each

Other Vauxhall

FSE fuel rail blank XE/LET £10
Polished exhaust heatshield XE/LET £5

Nova:

Pair of Nova headlights £15 each
Clear indicators for Nova £10
Nova alloy rear strut brace £30

Corsa:

3" stainless steel top hat to intercooler pipe, nice tig welds as used on Turbo Gavs Corsa Tombo, has Tial bov weld on fitting. £30

Performance Trim carbon door cards, holes for electric windows, few scratches £50

Xe big block conversion driveshafts, believed to be MANN shafts, complete with cv's, £50

Other parts:

Carbon fibre race seat, as removed from my Peugeot, its old, has no dates on it but has very tidy cloth on it, carbon is laquered which is marked here and there. Side or floor mounted £150

Steel sidemounts, not suitable with above chair but work with Sparco seats, painted black £25

Sabelt 6 point harness in black, 3" shoulder straps, all other 2", out of date, very clean and expensive new ! £70

New 13 Row Mocal oil cooler, one fitting is slightly bent over but could be straightened once you have a fitting on there. 1/2 BSP iirc £30

1 litre alloy swirl pot, very nicely made, as per the ones I have advertised on here in the past. Push on fittings. £50

Luke 5 point harness in purple, quite dirty, out of date but useable £30

3 spoke steering wheel, yellow surround, good condition £10

Flamer kit ! £20

Edd
10-06-11, 03:26 AM
ATE 16v discs and calipers ( one caliper is new ) £30

Which side caliper is new ? Is the new one a genuine item or refurbed ?

If it's left side and genuine I'll take them

Jonlem
10-06-11, 08:53 AM
It's a front left. Was a supplied from a Bosch agent. Has literally done a few k on one of my old cars. Still nice and shiny, just needs a quick wash down.

jodla
16-06-11, 09:13 AM
are the clear indicators mk1?

Dayle_
16-06-11, 02:25 PM
What date's on the Harness as you are now allowed to use harness's 5 years after the expire date ;) MSA have just brought that rule back in.

Jonlem
16-06-11, 10:58 PM
harnesses are now sold sadly, they went at PV

Also sold is :

Rear strut brace
Xe sump
Xe bottom end
Xe ecu
Xe head
Xe coilpack
Ecotec pipe
Xe inlet
Carbon seat
HT leads
Turbo oil feed
Cam sensor
1 x cam sensor

I still have some parts for sale to add to the first post

The headlights are Mk2 as are the clear indicators.