Does anyone work for an engineering company?

[Bubba]

i might be in need of some bolts being made because that are some god awful one off size :(

[Balley]

we can do it! what you after

[Southie]

My mates Dad owns a nut & bolt factory, they make them all in-house so I could get you his details if you want Bubbasquat ;)

Edit: pm'd

[Bubba]

ill upload pics when i get home.

[mk1nova_rich]

I also work for an engineering company

[swedge]

u own a grinder so im an engineer too :)

[Bubba]

this

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/253105_10150271712992845_717137844_9217226_770928_ n.jpg

Its a UNF 3/8" 24tpi thread. The head is 20.5mm in dia and about 6mm thick with 8mm allen key. total length is 1.5"

tiz the crank bolts for my bike :( nowhere sells them as Deity decided to make their own!

[Connor]

Buy some saint cranks that dont break :d

[Bubba]

cranks are fine lol as is the bb...just the bolt

[mowgli]

http://www.tridentracing.co.uk/info/fastcr.htm

they do button head socket screws in unf.. which is the closest that you'll get off the shelf.

[Bubba]

none of the heads are big enough Deity specially made these bolts

[mowgli]

washers??

[Bubba]

cant find any in the right size.

[mowgli]

drill out the heads off the old bolts..?

[Bubba]

its one of them solutions that i might have to go for in the short term

[R1CH]

Why not try a shop that deals with them or contact them direct, i'm sure you'll be able to get some bolts, bound to be easier that getting some made !

[Bubba]

i emailed deity...they have some, ive ordered them, but heard sod all back from them. no local bike shops can get them since they stopped production 5 years ago and the newer cranks use different bolts again

[Bubba]

i found some 20.8mm x M10 x 1mm washers :d and the right size bolt too...so i might be able to lash something up which will be rather special