PDA

View Full Version : Sills



Nova00
27-05-11, 01:15 PM
Where is the best place to get them from ?

Bodyshop says better to replace with full sills but says sills on Ebay not adequate - part has to be as per http://hadrian.dominohosting.biz/hadrian/hcpdb01.nsf/PartNoDocID/A6F45F4B9E652FFA8025759D00784272%21EditDocument&Ret=ALL

Any comments re replacing/ repair welcome

7ova
27-05-11, 09:15 PM
i got some from beevers at barnsley mate
hope this helps

swedge
27-05-11, 09:43 PM
i got mine from my local motor factors who are supplied but hadrian

John
27-05-11, 09:55 PM
full left and right sills on ebay.

http://cgi.ebay.co.uk/VAUXALL-NOVA-MK1-2-FULL-SILL-2-DOOR-LH-RH-/290566248369?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a71917b1

You won't get any bigger sills than these :)

Nova00
27-05-11, 10:50 PM
full left and right sills on ebay.

http://cgi.ebay.co.uk/VAUXALL-NOVA-MK1-2-FULL-SILL-2-DOOR-LH-RH-/290566248369?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43a71917b1

You won't get any bigger sills than these :)


my understanding that these are not adequate - hadrian ones look bigger on picture (and are dearer)

swedge
27-05-11, 11:03 PM
yeah they dont look as long as the ones i used

swedge
27-05-11, 11:05 PM
im sure mine were about £35 the pair

the one from ebay look like they stop at the crease on the top right of my pic

also i cut mine and joined them just under where the door closes not on the bit thats spot welded

http://i228.photobucket.com/albums/ee127/swedge87/IMG_0076.jpg

Nova00
28-05-11, 05:51 AM
where did you get them from ? - Hadrian or elsewhere ?

swedge
28-05-11, 02:12 PM
from my local motor factors, they were stickered by hadrian though

Andy
28-05-11, 02:44 PM
a full sill should include the doorstep iirc

Nova00
09-06-11, 12:46 PM
Where is the best place to get them from ?

Bodyshop says better to replace with full sills but says sills on Ebay not adequate - part has to be as per http://hadrian.dominohosting.biz/hadrian/hcpdb01.nsf/PartNoDocID/A6F45F4B9E652FFA8025759D00784272%21EditDocument&Ret=ALL

Any comments re replacing/ repair welcome

I now have the parts - just need sorting before MOT
I need to sort out fitting

Any advise/ comments are welcome !