X16xe gearbox and flywheel help?

[Danb1987]

My friend has given me a flat flywheel to use from an x14xe instead of my pot type....

What clutch setup will I need to buy??

And the f15 gearbox is the electrical speedo type and no good for my nova clocks..

What mechanical gearbox will bolt straight up?

I'm confused!!?

Dan

[comptoncj]

use a clutch off of the x14xe, and f13 and f15 mechanical boxes will fit

[Danb1987]

My only problem with the clutch is it needs to be 200bhp rated.. Iv found one for the pot type fly but Iv not looked into the 1.4 lol

*off to go look*

Will an f13 cope with much power?

[Edd]

200bhp from a x16xe ?!

What's the spec of the engine ?

[Danb1987]

It's not anything special just yet but the plans are to turbocharge it... Iv seen a fast road clutch rated to 200bhp but for the pot type fly...

Will having a flat fly really make much difference?

[Edd]

I thought people used a nova gte fly and clutch set up when doing this conversion ?

If I was doing the conversion I'd want a f13 from a nova, which has the clutch inspection plate, not a corsa box

[phazer]

I've got the original SRi flywheel, clutch and gearbox on mine.

[Danb1987]

Would I be able to take the mechanical drive out of my f10 and fit it to the f15?

[peester]

better to pay attention to torque than bhp with clutch gearbox limits..?
best get a helix clutch for the f15cr, if your turbo-ing

[chambers1984]

the std clutch will cope fine mate that c16xe turbo my mates got is still on std clutch. had abuse since built not sliped yet

[peester]

well im sure youll be fitted a new one anyway; may as well for piece of mind..