View Full Version : Brake Bleeding Kits
novarally
14-05-11, 09:14 AM
All thoughts welcome from anyone who's used different kits............
I'm looking to buy a one-man kit for bleeding brakes, and am swaying toward the hand-pump vacuum type, as produced by Sealey, Mityvac, Draper etc.
I've never used one, but wondered if anyone has any experience of these?
I don't want the type of kit which uses an air compressor, as I want to be able to use it whilst I'm at a sprint or hillclimb event if necessary, so I won't have a compressor handy (unless of course it can be connected up to a 12v compressor?). And I've used the Eezibleed type that you connect to a tyre, which was frankly useless.
What do we know people?
Or any other suggestions, bearing in mind that I rarely have an assistant available, so 'get your mate to pump the pedal' is not useful.
pikey1986
14-05-11, 09:36 AM
ive got a gun-son easy bleed kit and its quite frankly amazing, id recommend them to anyone colin
edit
you use a spare tyre to supply the pressure at about 20psi :thumb:
we have a MAC tools bleeder at work and its fantastic. it has a cam you screw on the reservoir, with a quick release fitting, and the machine has a reservoir, and a high pressure pump, you connect it to the cap, turn it on and it pressurises the system. then when you open a bleed nipple it turns on.
its powered from any 12 v battery so ideal for you
can't seem to find it on their website anymore, so it may be last years model. I can ask my MAC rep on wednesday if you like? I think conningsby is on his route so he may be able to pop round and see you?
I've always used one that connects to a tyre
Never had any problems with them, no air locks etc
Royston
14-05-11, 10:16 AM
Gunsons eeybleed for me, never had a problem, cheap and doesn't need a compressor.
You just have to make sure it is assembled correctly i.e. correct top and seal
Pressure in tyre should be @ 20psi
novarally
14-05-11, 10:30 AM
we have a MAC tools bleeder at work and its fantastic. it has a cam you screw on the reservoir, with a quick release fitting, and the machine has a reservoir, and a high pressure pump, you connect it to the cap, turn it on and it pressurises the system. then when you open a bleed nipple it turns on.
its powered from any 12 v battery so ideal for you
can't seem to find it on their website anymore, so it may be last years model. I can ask my MAC rep on wednesday if you like? I think conningsby is on his route so he may be able to pop round and see you?
Sounds very interesting indeed, thanks. If you could ask him about it that would be much appreciated.
novarally
14-05-11, 10:30 AM
we have a MAC tools bleeder at work and its fantastic. it has a cam you screw on the reservoir, with a quick release fitting, and the machine has a reservoir, and a high pressure pump, you connect it to the cap, turn it on and it pressurises the system. then when you open a bleed nipple it turns on.
its powered from any 12 v battery so ideal for you
can't seem to find it on their website anymore, so it may be last years model. I can ask my MAC rep on wednesday if you like? I think conningsby is on his route so he may be able to pop round and see you?
Sounds very interesting indeed, thanks. If you could ask him about it that would be much appreciated.
16v Nova Kev
14-05-11, 10:53 AM
as said above the gunson one is really good.
Seriously ive never used anything quicker and easier than those one-way valve type jobbies from halfords.
At £8 it truly is a bargain,ive bled up stuff in seconds with that little pipe.
Did a full fluid change on my nova with it in about 10mins
i used an "easy bleed" or how ever its spelt lol.
one man jobbie, as above, you use a tyre for pressure. works well.
Sounds very interesting indeed, thanks. If you could ask him about it that would be much appreciated.
I will ask him, and let you know Colin :thumb:
Seriously ive never used anything quicker and easier than those one-way valve type jobbies from halfords.
At £8 it truly is a bargain,ive bled up stuff in seconds with that little pipe.
Did a full fluid change on my nova with it in about 10mins
Dont think I've seen those before but sounds decent, guess you chuck it on open up the bleed nipple and jump in yourself to pump the brake?
Dont think I've seen those before but sounds decent, guess you chuck it on open up the bleed nipple and jump in yourself to pump the brake?
Yep,just pump then look in the pipe til the bubbles have gone.So simple
I use the easibleed a lot as its great, but found it works best with the pressure down at 10psi rather than the max of 20psi. I also use the one man low tech kit at the caliper end too as it was dirt cheap and has the right pipe for the nipples etc.
What he said /\
Its only a plastic bottle and thin walled tubing, I use less than 15psi in mine and it works fine.
One tip id give is fit the eezi bleed to the mc reservoir, pressurise it with NO fluid in the e/b bottle, feel/check for air leaks around the cap on the mc reservoir. If all is good then disconnect from your tyre and fill the bottle with fluid.
If you dont get a 100% good seal on the reservoir and you pressure the eezibleed up whilst its filled you will get brake fluid shooting at you at 15+ psi.... lol
To be fair that tip ^ is in the Eazibleed instructions lol
I've got one and can't fault it to be honest. When I got mine Screwfix was cheapest.
Oh right, assuming youve got the instructions of course, i lent mine so didnt have them... :)
i just use the pipe with a slit in it & a jam jar with some cooking oil in it. (i'm not wasting brake fluid)
I have a mityvac, Never had any issues with it, Handy for hand pumping fuel too
novarally
19-05-11, 07:15 AM
I will ask him, and let you know Colin :thumb:
Lewis - any luck with the Mac Tools rep?
ah yes, sorry I've not been near a computer. an email is on its way :thumb:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.