PDA

View Full Version : door cards


paddy quinn
10-05-11, 07:05 PM
what door cards will fit in a nova any ideas aprriciated
Lewis.
10-05-11, 07:06 PM
Nova ones fit quite well
Jack
10-05-11, 07:07 PM
Could probably fit all sorts in the boot as well
wwmnw
10-05-11, 07:07 PM
Nova ones fit quite well

But not perfectly, like everything else on a nova.
Lewis.
10-05-11, 07:09 PM
Could probably fit all sorts in the boot as well

if you were to fit a roof rack then the world really is your oyster. although I suppose they then aren't 'in' a nova, so much as on it
windfreek
10-05-11, 07:10 PM
Nova ones fit quite well

lol


But not perfectly, like everything else on a nova.

pmsl
phazer
10-05-11, 07:21 PM
Some these will look well tidy
http://image.made-in-china.com/2f1j00gMZECaYFZbhy/Hotel-Door-Card-Key-Tag-RFID-Card.jpg
Lewis.
10-05-11, 07:24 PM
/\ lol
MK999
10-05-11, 07:26 PM
http://www.addis.co.uk/modules/lib/phpthumb/phpThumb.php?src=/website/apache/addis.co.uk/htdocs//pics_produkte_jpg//webpics/510756.jpg&w=200&h=200 http://t0.gstatic.com/images?q=tbn:ANd9GcT_m5Vf0B4eqkwgQd0Xw5bs9ORdG9Rmw 8ZVqQbD-MQ66RpZn5dWvQ

For track :cool:
Jack
10-05-11, 07:27 PM
Some these will look well tidy
http://image.made-in-china.com/2f1j00gMZECaYFZbhy/Hotel-Door-Card-Key-Tag-RFID-Card.jpg
They remind me of those stick-on scratch guards you used to get, the ones that went round the door locks to protect the paint from key scratches lol
MK999
10-05-11, 07:30 PM
They remind me of those stick-on scratch guards you used to get, the ones that went round the door locks to protect the paint from key scratches lol

They must be scratch guards for people that like dogging then.
paddy quinn
10-05-11, 08:21 PM
god you lot are no help will calibra ones fit yes or no
Lewis.
10-05-11, 08:26 PM
you should know what we're like by now lol
and no, no chance mate
mk1nova_rich
10-05-11, 08:26 PM
god you lot are no help will calibra ones fit yes or no

No lol they are huge!! Why not ask that in first place?! :wtf:
windfreek
10-05-11, 08:29 PM
about as well as fitting a limo carpet into your footwells, with some cutting anything will fit, but the leather afterwards will ultimately look like a grannies tits
Lewis.
10-05-11, 08:33 PM
but the leather afterwards will ultimately look like a grannies tits

lol lol
windfreek
10-05-11, 08:35 PM
http://www.bitboard.com/0798/saggy.jpg

Tasty! :d
Lewis.
10-05-11, 08:45 PM
eurgh! and after i repped you a minute ago too! I can easilly neg you lol
windfreek
10-05-11, 08:51 PM
eurgh! and after i repped you a minute ago too! I can easilly neg you lol

pmsl itd be worth it to get the point across lol
Lewis.
10-05-11, 08:59 PM
The point being that a grannys tits are like spaniels ears, or that Calibra door cards don't fit Nova's?
TeddyThom
10-05-11, 09:22 PM
Could probably fit all sorts in the boot as well
Get a loon, strip it out, then you have an even bigger boot, oh and add a roof rack and jobs a good'un.


http://www.bitboard.com/0798/saggy.jpg

Tasty! :d

A teenage girl was wearing a see through top with no bra. Her gran threw a massive hissy fit, "You can't go out like that!!" she said. "Chill gran, these are modern times, you gotta let your rose buds show" replied the girl. Next day she gets home to find her gran topless. "Argh! you can't do that gran!" she shouts, Gran replies "if you can show your rose buds, I can show me hanging baskets!!"


Random.
Lewis.
10-05-11, 09:55 PM
lmao lol
windfreek
10-05-11, 10:06 PM
PMSL, anyway getting back onto the subject, why not just re-trim your cards you have now to suit your needs, i did mine n there not 3 bad

http://i1102.photobucket.com/albums/g460/windfreek/109.jpg

http://i1102.photobucket.com/albums/g460/windfreek/133.jpg

http://i1102.photobucket.com/albums/g460/windfreek/125.jpg
Lewis.
11-05-11, 07:48 AM
they look good mate, where did you get the material from? but er, how do you open your doors? lol

and this is why i love the PNG: 23 posts before anything even remotely related to the question is posted lol well done all
windfreek
11-05-11, 09:46 AM
they look good mate, where did you get the material from? but er, how do you open your doors? lol

I got the material from work that was for a prototype Mulsanne but never got used so to save binin it, it came home and is now on my headlining, van divider, cards etc,

Re: getting out, its all elrctronic dehandled inside n out!
L14MNP
11-05-11, 01:29 PM
Re: getting out, its all elrctronic dehandled inside n out!


That's gonna epically own you one day! lol OP expecting Calibra door cards to fit a Nova is a winner too! lol
Southie
11-05-11, 01:44 PM
OP read this from 2005 ;) >LINK (http://www.pngclub.com/forum/showthread.php?t=53316)<
windfreek
11-05-11, 02:25 PM
That's gonna epically own you one day!

Bein at the forefront of technology I have a failsafe in the form of a steel cable loop (as seen in image 2) on both doors with which to escape due to electrical fault.... Also my missus insisded she had an easier way to escape, so she has a breakglass hammer by her seat! Lol
Dave.
11-05-11, 02:32 PM
Windfreek how did you get the material to raise and lower to create the low lines in the material? Ive jsut put electric windows in mine and planning to re-trim them in soemthing, but dont want them to jsut be flat pieces of card looking things lol
windfreek
11-05-11, 05:24 PM
http://dasthunder.no.sapo.pt/Photo%20017.jpg

if you can see in the photo above, (not mine) i used cards similar to these as they were on the original electric window setup (to save blanking at least one hole over) but if you notice they already have the indentations on them, i just simply overlayed the old card with a leather composite foam to line the door card and affixed it using an araldite/thinners (5:1) mix to add a bottom layer, and along the original 3 lines i used a soldering gun to melt back the foam to create a bigger indentation, then just layed high yeild compression tape to fix the material to the foam
Dave.
12-05-11, 05:46 PM
if you can see in the photo above, (not mine) i used cards similar to these as they were on the original electric window setup (to save blanking at least one hole over) but if you notice they already have the indentations on them, i just simply overlayed the old card with a leather composite foam to line the door card and affixed it using an araldite/thinners (5:1) mix to add a bottom layer, and along the original 3 lines i used a soldering gun to melt back the foam to create a bigger indentation, then just layed high yeild compression tape to fix the material to the foam

So i cant just lay cloth over my cards and gaffa tape it on then? lol

I need to re-trim my cards but dont want them to look plan and flat, i may look into doing this, cheers dude, +rep if i can but i think i gave it you for my electric window switch thread lol :thumb:
windfreek
12-05-11, 06:48 PM
So i cant just lay cloth over my cards and gaffa tape it on then? lol :thumb:

well you could, but the result would be less than satisfactory! lol
windfreek
12-05-11, 09:48 PM
...always remember tho not to use suede for several reasons

1. is a bugger to keep clean
2. unless you use curtain suede, it will rip or tear as it will be to thin
3. its far too pourous so you cant adhere it with a liquid or spray, double sided tape only!
4. it also looks like cack if you cba doin it properly when you have a broken arm! (as below)

http://i1102.photobucket.com/albums/g460/windfreek/80.jpg


but its quite good for a sub box covering


http://i1102.photobucket.com/albums/g460/windfreek/96.jpg