View Full Version : How to remove E20 Crank Pulley bolt (c20xe)
Mucker_TD
09-05-11, 06:23 PM
As title says, how do you safely remove the E20 Crank pulley bolt from a c20xe lump?
Bear in mind ive already taking the cambelt, tensioners and cam pulleys off.
Cheers, matt
Grind it off if all else fails
Air gun, or wedge something in the flywheel to lock it and lever on it!
comptoncj
09-05-11, 06:35 PM
Mine came out with a air gun really easily i was expecting it to be a pain as i have heard horror stories about them, if it is being a pain warm the bolt up, lock the engine and give it some stick with a big bar!
davidfox280585
09-05-11, 06:39 PM
i ground the head off, removed the large washer, tapped pully off and then it unwound with my fingers and replaced with a new bolt
Mucker_TD
09-05-11, 06:43 PM
thankyou very much!
Angus Closier
09-05-11, 07:01 PM
Heat and A air gun sorted mine...
Mucker_TD
10-05-11, 06:40 PM
Silly question, is the bolt normal thread or reverse?
normal right hand thread :thumb:
mine came undone alright before, i need to go and undo one now. think i will fire up the compressor.
i have a spare bolt, for the time one snaps lol.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.