View Full Version : C20xe driveshafts!
I've just been reading the articles on the xe conversion will calibra driveshafts fit if I've got the conversion hubs?
General Baxter
08-05-11, 10:49 PM
well it will all go together
but wont fit on the nova track
That's what I thought I also have some gsi driveshafts I know they will fit obviously but can I use the cvs off the calibra driveshafts for the gsi ones to fit in the block?
General Baxter
08-05-11, 10:54 PM
have you used the search ?
That's what I thought I also have some gsi driveshafts I know they will fit obviously but can I use the cvs off the calibra driveshafts for the gsi ones to fit in the block?
you need to take the inner cv's off & count the shaft splines on both sets of shafts. thats how you find out
you need to take the inner cv's off & count the shaft splines on both sets of shafts. thats how you find out
No. You need 22 spline shafts and MK2 cav 1.6 inner CV's.
or daewoo ones, or if the internals of the cv joints match, make a matching set
Right ok I've got some 22 spline shafts so would just need the cav cvs thanks for the help gents I did search it all but couldn't find it through the masses of threads so just thought be easier to ask!
mk1nova_rich
08-05-11, 11:55 PM
Its also covered in the 2.0 fitting guide in Articles for future reference :thumb:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.