View Full Version : megajolt crank sensor
anyone fitted megajolt to a e16se
looking for some pics on how they have mounted the crank sensor
http://www.pngclub.com/forum/showthread.php?t=128506&highlight=Megajolt
yeah ive had a look through that but cant see how the crank sensor is mounted
just find some suitable holes on the block. and then make a stiff bracket with two holes in - one for the sensor to go through, and the second for the bracket to bolt to.
simples.
pic of mine
http://i30.photobucket.com/albums/c325/bmw156/b88c134d.jpg
Dosnt the sensor have to be 90 degrees btdc?
Dosnt the sensor have to be 90 degrees btdc?
no. it has to be in relation to the trigger wheel.
so which ever one you mount first (trigger wheel or sensor) the other one has to be in the right place.
if it was me, i would do the sensor first and then the wheel.
http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide
that gives an excellent moving diagram of the wheel/sensor set up.
Thins you could give me some more pics on the way you have that bolted up mate, i have mine facing the side of my trigger wheel
Looking at the guide now it dosnt matter what side as long as it's in the right position to the missing tooth
Is it not possable to use the C16 setup?
Thins you could give me some more pics on the way you have that bolted up mate, i have mine facing the side of my trigger wheel
its just a small L bracket, so the bit you can see in the pic is the long part of the L.
and the other end just bolts into one of the backing plate bolt holes.
Is it not possable to use the C16 setup?
As in the pulley and crank sensor?
No you can't megajolt uses a 36-1 pulley which is different from vaux
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.