View Full Version : c20xe springs (250lbs -50mm)
hi, i have bought a set of c20xe springs as above but they seem to be 2inch to short to seat in the front shocker correctly. Im wondering what shockers people use with these cuctom springs or how they overcome this problem? cheers
MattBrown
03-05-11, 12:00 AM
Too short, or diameter too small?
shed-on-wheels
03-05-11, 12:02 AM
if they standerd shocks and lowering springs they will be to small dude use spax or koni shocks fella
are you using standard shocks? as shed on wheels said you will need shorter shocks
they are shortened shocks, i have tried bilstein, g-max and a koni shocker and there all to long for the springs. the springs are to short in length, the shortest spring the shortened shockers could accept would be 9 inches in length but the springs are 7 inches in length. the diameter is fine also shape ect. i cant see how they would be any good, or if there is a solution ?
Have the springs been cut?
matthew172
12-05-11, 10:13 PM
hav u cut a coyl of dem m8t?
How low are the springs do you know?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.