Brake servo studs

[garethcolley]

Hi,

Can the brake servo studs be removed or are they welded or fixed from the other side (inside the servo) during assembly? I would like to remove them and fit longer ones if possible.

Thanks in advance.
Gareth

[dan23]

you mean the studs on the metal square that the servo sits on?
i think they are fixed but they may come out if you try hard enough
you could drill them out run a tap through the hole an insert new longer studs

why do you want to run longer studs ?

[garethcolley]

you mean the studs on the metal square that the servo sits on?
i think they are fixed but they may come out if you try hard enough
you could drill them out run a tap through the hole an insert new longer studs

why do you want to run longer studs ?

Hi Dan, thanks for the reply. I mean the studs that are part of the servo that you bolt to the servo bracket. I need to put some longer ones as i'm fitting a cav turbo servo to my nova which will need spacing off the bracket by about 40mm hence the standard servo studs not reaching.