PDA

View Full Version : electric windows



paddy quinn
02-05-11, 03:18 PM
can some one get me a diagram on how to wire them up as it looks like i wont be able to get a harness for them as the rare as rocking horse crap

swedge
02-05-11, 03:59 PM
you need the control box thing so not sure if it can be hard wired in

Iain
02-05-11, 04:03 PM
Control box is for the CL isn't it?

It's just giving 12v and earth to either wire on the motor for up/down isn't it? If so you don't really need a wiring diagram as you just have two switches that make a circuit to trigger them

swedge
02-05-11, 04:08 PM
aright thought it might havce had sometghing to do with the windows too

Balley
02-05-11, 04:19 PM
right well IIRC you need four relays to do it and be good at wiring. you only have four wires from each switch and two on the motor.. all what happens is it switches polarity!
Thats as much as I can tell you.

paddy quinn
05-05-11, 10:29 PM
any other window loom that will fit

mk1nova_rich
05-05-11, 10:55 PM
Whats up with winders?

paddy quinn
05-05-11, 11:07 PM
winders are old i want electric

paddy quinn
05-05-11, 11:08 PM
winders are old i want electric and they hit my

paddy quinn
05-05-11, 11:08 PM
winders are old i want electric and they hit my door speakers

Dave.
06-05-11, 12:08 AM
winders are old i want electric and they hit my

Window winders capable of GBH? thats a new one

paddy quinn
06-05-11, 12:15 AM
my pc played up

brainsnova
06-05-11, 12:28 AM
Two wires from each door to the switches. A 12v feed to the switches and an earth to the switches. Thats all no relays needed. I wired in escort mk5 switches as it's the same wiring.

paddy quinn
06-05-11, 12:48 AM
meh its going to be a pain to wire them

brainsnova
06-05-11, 12:56 AM
It's easy. The hardest part is getting the wires into the doors

paddy quinn
06-05-11, 01:23 AM
gettin the wire in the doors is easy as ive got door speakers so will put them in same hole