View Full Version : Windscreen fitting and cage
mk1nova_rich
01-05-11, 01:03 PM
Just a quick question, is it possible to fit a screen with a rollcage in?
It is a type that comes through the dash so the front hoops are close to the A pillars all the way down
http://i12.photobucket.com/albums/a226/sclurgess/shows/pv%202010/SAM_0540.jpg
no windscreen and very tight cage with gusseting all down the a pillers.
http://i12.photobucket.com/albums/a226/sclurgess/shows/pv%202010/SAM_0578.jpg
then following day after fitting the windscreen in the field lol.
so yes very possible
Steve0011
01-05-11, 05:12 PM
yes, just :)
when you fit the rubber to the screen put in a piece of string all the way around the groove that locates on the car (if you know what i mean ;)) with a loop. fit the screen the best you can and then pulling the string from the inside of the car slowly it will help with the rest :)
s
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.