PDA

View Full Version : Nova master cylinder



simonm
28-04-11, 07:48 PM
Hi lads just wondering what is the best one to use will be running 288 up front and will eventually have discs on rear and want to keep the servo and also want one with just two Ports for just front and back

6pot nova
29-04-11, 09:02 AM
you wil need to look for something that had ABS, they are big and only 2 way but you mite want to think about a bius valve to get the braking you want front and rear

Mike
29-04-11, 10:14 AM
Corsa B 16v master cyclinder.

Iain
29-04-11, 10:16 AM
Corsa B 16v master cyclinder.

OK to use those horizontally instead of vertically?

Mike
29-04-11, 10:36 AM
Just use the entire pedal setup IMO.

Two proverbial birds, one hactual stone lol

Iain
29-04-11, 10:37 AM
Yeah fair point lol

simonm
29-04-11, 06:49 PM
Only put new battery trey in so not really an option what would a astra or vectra b one be like would it fit in the same place physically also have a xe in and electric power steering pump in so space is tight

moffat
29-04-11, 07:09 PM
just use your nova master cylinder. im running 256mm on the front and rear discs on a normal nova brake cylinder, new brake lines and briaded hoses also. oh and ill need a bias valve so not to lock the rears

simonm
29-04-11, 07:43 PM
Had that set up on my last one and had a little too much travel on the pedal also wanted to change it to a two port cylinder to run one line to rears through my bias valve have a tilton one