djgritt
24-04-11, 11:43 AM
As per title, I have the following parts for sale as they are all incompatible with my X18XE1 Converted Corsa
The 4-1 Manifold will fit both the 1.4 16v (X14XE) & 1.6 16v (X16XE), and MAY fit the earlier 1.6 16v (C16XE), but cannot be sure or guarantee it will
The Engine Cover will fit all the above engines
As far as I am aware, the Airbox will NOT fit the C16XE engines, though again, may be wrong.
The Manifold is a Sportex item, it has NO compatibility with the SAI System found on the later engines. It will be tidied up and quickly given a coat of VHT Black prior to sale - the pics are from my storage container;
http://img.photobucket.com/albums/v513/djgritt/8ea86680.jpg
http://img.photobucket.com/albums/v513/djgritt/054bcfe5.jpg
Looking for around £75 for this - collection preferred and can meet within 25 miles of Sturminster Newton, Dorset for this.
Carbon Fibre Engine Cover - will be cleaned prior to sale - some oil residue from a leaky cover gasket
http://img.photobucket.com/albums/v513/djgritt/f070c94f.jpg
Looking for around £25 for this - some clowns on eBay are offering these for well over £100 new! - collection preferred and can meet within 25 miles of Sturminster Newton, Dorset for this
Derestricted Airbox Assembly - I removed the internal pipework, blanks and reducers from this, and also drilled the front face and side near the wing - it comes with a used paper filter and also the inlet pipe to the slam panel (I have noticed this is a broader type than fitted to some of the other Models) - the airbox was originally from an X16XE Corsa GSi;
http://img.photobucket.com/albums/v513/djgritt/1a8ecbdc.jpg
Looking for around £10 for this - collection preferred and can meet within 25 miles of Sturminster Newton, Dorset for this
Also, unless an item sells individually, I would happily take £100 for all items as a job lot - but they would then HAVE to be collected (I would be willing to meet up to 50 miles from my location however if it all goes together)
The 4-1 Manifold will fit both the 1.4 16v (X14XE) & 1.6 16v (X16XE), and MAY fit the earlier 1.6 16v (C16XE), but cannot be sure or guarantee it will
The Engine Cover will fit all the above engines
As far as I am aware, the Airbox will NOT fit the C16XE engines, though again, may be wrong.
The Manifold is a Sportex item, it has NO compatibility with the SAI System found on the later engines. It will be tidied up and quickly given a coat of VHT Black prior to sale - the pics are from my storage container;
http://img.photobucket.com/albums/v513/djgritt/8ea86680.jpg
http://img.photobucket.com/albums/v513/djgritt/054bcfe5.jpg
Looking for around £75 for this - collection preferred and can meet within 25 miles of Sturminster Newton, Dorset for this.
Carbon Fibre Engine Cover - will be cleaned prior to sale - some oil residue from a leaky cover gasket
http://img.photobucket.com/albums/v513/djgritt/f070c94f.jpg
Looking for around £25 for this - some clowns on eBay are offering these for well over £100 new! - collection preferred and can meet within 25 miles of Sturminster Newton, Dorset for this
Derestricted Airbox Assembly - I removed the internal pipework, blanks and reducers from this, and also drilled the front face and side near the wing - it comes with a used paper filter and also the inlet pipe to the slam panel (I have noticed this is a broader type than fitted to some of the other Models) - the airbox was originally from an X16XE Corsa GSi;
http://img.photobucket.com/albums/v513/djgritt/1a8ecbdc.jpg
Looking for around £10 for this - collection preferred and can meet within 25 miles of Sturminster Newton, Dorset for this
Also, unless an item sells individually, I would happily take £100 for all items as a job lot - but they would then HAVE to be collected (I would be willing to meet up to 50 miles from my location however if it all goes together)